Carbon Dive Planes - E36 M3

Our Carbon Dive Planes for your E36 M3 front bumper are the next step in adding frontal downforce after adding a proper splitter. The added aero will keep your car's front end planted so the it doesn't fade into understeer through the duration of a race*. Additional frontal downforce can also reduce excessive wear on front tires that would otherwise be struggling for grip. All for just a little more than the cost of one race tire! 

These race-quality carbon dive planes fit any E36 with an E36 M3 front bumper. Includes one pair of dive planes and nut-plate hardware with bolts to make dive planes easily removable.

*NASA GTS and BMW Prepared/Mod legal, as well as many other organizations. Check with your sanctioning body.

Note: Dive planes may not work with some aftermarket splitters due to how low they mount. Please refer to pictures for reference.

Note: BimmerWorld race carbon parts are designed solely to improve performance. Surface finish and appearance are not priorities in our racing parts. Carbon may be unfinished or sometimes with a minimal clearcoat (for UV protection). You will not find high gloss finishes here for style points. If your priorities are a show car shine there is no shortage of cheaper carbon-wrapped fiberglass or plastic pieces on the market. These are usually loaded with fiberglass, filler, resin, and many clearcoat layers that make them too heavy or not rigid enough for real world competition use. If you wish to apply a finish we suggest vinyl wrap or a light filler skim coat and then paint. In any case, professional prep and installation are strongly advised.