ASC+T Intake Boot - E36 325i/M3 - 13541703694

Common source of intake & vacuum leaks, poor idle, rough running, and lean condition codes. Replaces BMW part #13541703694

+ -
+ -
+ -
+ -
+ -
+ -
+ -
+ -

  •  

Price:
$13.27

The rubber intake boot connects the air flow sensor with the ASC+T traction control valve on the E36 325i, 325is, 325ic, or 1995 M3 with ASC+T. It's after the air filter and mass air meter so any rips or tears on the boot material will allow unfiltered and unmetered air into the engine. And since vacuum and air pressure within the engine are closely managed, any air leak can be a serious problem. 

Air leaks from a cracked intake boot can cause your E36 to run rough, poor idle, throttle surging, stumbling, hesitations, and misfires. These can be caused by other things but a leak in the intake boot is easy to check and inexpensive to fix! This is a less expensive aftermarket version of the original BMW rubber intake boot and comes with a two year warranty.

For cars with ASC+T traction control system only, as offered in 1994 and 1995 model years. Not for cars after 1995. 

BMW Fitments:

3 Series
E36 (92-99) > 325i
E36 (92-99) > 325ic
E36 (92-99) > 325is
E36 (92-99) > M3 (1995)
Recently Viewed Products