3 Series LIFETIME WARRANTY Rear Shock Mounts

Purchase 3 Series LIFETIME WARRANTY Rear Shock Mounts

The rear shock mount is the weakest bushing on the 84 and up 3 Series cars. BMW has gone through more than 5 generations of designs, and the newest mount is still prone to failure. This replacement mount based on the popular JTD performance rear shock mount (but made for higher production) was released initially for sale to repair shops to eliminate the common service come-back expense associated with factory mounts. This mount is now available to you directly from Bimmerworld.

The common problem with the factory design is the shock does not take only a vertical load - the trailing arm has an arced range of motion. This forces the shock to pivot around the upper shock mount, which eventually causes the adhesive bond in the stock rubber mount to fail - a process expedited when combined with performance shocks.

This new design allows this pivoting motion and dramatically extends the life of the mount. We are so confident in these mounts that if they ever fail, you can trade them in for a new set at no charge! Made with high quality Buna rubber to eliminate squeaks and a high production stamped steel plate, costs for this extraordinary mount are close to the BMW factory price. Fits all 1984-present 3 Series cars.

Sold in pairs.

Purchase 3 Series LIFETIME WARRANTY Rear Shock Mounts

Other products in the category Suspension / Steering / Stock Replacement/Performance:

BMW Motorsport X Brace

Front Strut Mounts - Camber Correcting and Stock -- We carry several types of factory front strut mounts (or guide support bushings). The camber correcting mounts, or "crash mounts" were originally designed to restore alignment in wrecked cars, but can also . . .

3 Series Motorsport Front Control Arm Bushings - Solid Rubber -- Replacement factory bushings from M3 cars (fit all E30/36 3 Series), made of rubber. We recommend using offset for performance in all 3 Series cars except the 1996-1999 E36 M3, which requires centered bushings. OEM Meyle or Lemfoerder parts. Sold in . . .

E46 3 Series Front Control Arm Bushing/Housing Set (Except Xi) -- Replacement aftermarket bushings fit all E46 3 Series (except M3 and 4wd Xi models) and all Z4. These are sold pre-pressed into a cast aluminum housing. Rubber bushings are an updated designed to address strength issues with stock bushings. Sold in . . .

E46 Xi AWD 3 Series Front Control Arm Center Ball Joint/Bracket Set -- Replacement OEM supplier control arm bracket with ball joint. Fits all E46 3 Series Xi models. Sold in pairs ONLY.

E46 Xi AWD Front Control Arm Bushings - Stock

3 Series Front Control Arm -- These are quality replacement front control arms with balljoints already pressed in (Xi arms do not include center ball joint and bracket set, available separately). When one balljoint goes, the others often aren't far behind, so to save time and money . . .

Tie Rods -- Replace worn or broken tie rods with new OEM quality parts. We recommend replacing complete tie rod assemblies. Sold as complete assembly.

E30 Camber Correcting Offset Trailing Arm Bushing -- Offset bushing set allows you to set rear camber and alignment. This is an offset, non-adjustable piece. Bushing set includes two bushings for ONE rear arm - order TWO sets to do both sides of the car.

E36/46 Trailing Arm Bushing -- Fits all E36 cars except 318ti, TWO REQUIRED PER CAR.

3 Series Rear Shock Mounts - Stock Heavy-Duty -- 3 Series stock rear shock mounts are a high wear item. These heavy-duty mounts are an upgraded replacement for worn mounts on a stock-type suspension. Fits all 3 Series, 1984-present, should be replaced in pairs, so that is how we sell them. We strongly . . .

Rear Lower Control Arm -- Quality Lemfoerder parts. Fits all E36 and E46 3 Series, except 318ti.

Reinforced Rear Lower Control Arm -- The rear lower control arms are one of the weaker items on your BMW's rear suspension. These quality Lemfoerder arms have been reinforced on both sides to strengthen the flimsy stock arm. Fits all E36 and E46 3 Series, except 318ti. Legal in BMW . . .

Front Hub Assembly -- Sold per each - 2 required per car. Please email for additional fitments. *E30 M3 cars can use the E28 front hub. The ABS sensor rings are different and must be swapped on install. **Due to changes in hub specs from BMW, Performance Friction Direct . . .

Rear Wheel Bearing -- Sold per each - 2 required per car. Please email for additional fitments.

Power Steering Reservoir -- Stock replacement part. Fits most BMW models.

Power Steering Hose - Fluid Reservoir to Pump -- Please call for models not listed

RELATED PRODUCTS

Rear Shock Tower Reinforcement Plates -- Protect your shock towers from damage and fatigue