BimmerWorld Carbon E36 Splitter/Undertray

Purchase BimmerWorld Carbon E36 Splitter/Undertray

The BimmerWorld Carbon E36 Splitter/Undertray was created to balance the huge downforce levels generated, even at low speeds, from our Carbon Race Wing.  This splitter maximizes rules for BMW Club Racing, but is an excellent part for other race series and cars retaining an E36 M3 stock front bumper cover.  Our kit is complete, but replacement parts are available separately for damage replacement (see below for subsidized damage replacement parts).

• Effective - This splitter maximizes the surface area allowed by BMW Race rules (with an optimized front track width).  Maximum extension provides high levels of downforce, while a full undertray maximizes efficiency by smoothing air under the car as long as possible.
• Lightweight - Unlike the heavy Motorsport splitter, our unit weighs in at about 10# complete.  Reducing weight in front of the front tires has a huge affect on handling.
• Durable - Made to lower the front of the car about 1.5", this splitter is a good compromise between functionality and form.  This height typically withstands off-track excursions without major damage.  Additionally, due to the standoff mounting, a damaged undertray will not typically take your entire bumper with it, confining most repairs to the undertray itself.
• High Quality - The undertray is constructed as a honeycomb core composite by the manufacturer of our World Challenge carbon race parts.  These parts will take a beating!
• Damage Replacement - In the event of damage, this piece can be potentially repaired (send picture for quote).  If repair is not possible, BimmerWorld will subsidize the expense of the replacement undertray (requires return of damaged part, ask a salesman for pricing).  This program was developed because we want you to have the best part on the track and we are not interested in profiting from accidents on this piece.

This kit consists of a durable honeycomb-core carbon undertray, Max Velocity RS lip spoiler, and standoffs.  Welding required to support the rear of the undertray.  Fits E36 cars, M3 front bumper required.

Purchase BimmerWorld Carbon E36 Splitter/Undertray

Other products in the category Body / Aero:

BMW Motorsport "M" Emblem -- Genuine BMW part, adhesive backing.

BMW Roundel Emblem -- Replace the lost, stolen, or faded BMW emblem on your car. NOTE: Some Roundel emblems are additional charge - we will notify you for approval before changing the part used for your application.

E36 M3 Front Bumper Strip - "BMW" Logo -- Genuine BMW part - not for use with front license plate.

E30 and E36 Foglight Blank Plates -- Gray plastic - can be painted or left gray. Sold in pairs. E30 model fits only 9/87-92 cars, except M3 E36 model fits all E36 cars

Hood Shock -- OEM gas shocks to replace the tired shocks that constantly drop the hood on your head. Sold each - some cars require two.

OMP Captive Hood Pins -- All hardware included, drilling required. Includes one pair. Silver pins are steel, red and blue are steel and aluminum.

SSI Stealth Underpanel - E36 3 Series -- The Stealth Underpanel is the culmination of many hours of problem solving geared towards the e36 front bumper assembly. The stock plastic under tray and pork chops used to protect the engine from road debris and reinforce the bumper cover have . . .

E30 Stock Front Valence/Splitter -- This piece comes in two styles, which are interchangeable: Standard - approximately 1" in height "is" Style - approximately 2.5" in height Fits E30 cars (except M3) 9/87 and newer, convertible 10/90+.

E30 M3 Evo II Front Chin Spoiler -- Attaches to the existing front bumper cover, increases front downforce. Standard on the Euro E30 M3 Evo II. Genuine Motorsport part, unfinished. Mounting hardware included.

MaxVelocity E36 M3 Velocity Splitter -- Made from ABS plastic for durability and longevity, the Velocity Splitters are one of the best and easiest modification you can make to the appearance of your E36 M3. They give your M3 a lower, and more aggressive look but it doesn't end there!  . . .

MaxVelocity E36 M3 RS Lip Spoiler -- Add a more aggressive look to your 1994-1999 M3!  The Max Velocity RS lip spoiler will give your M3 a more distinct and sportier look without sacrificing drivability. The RS lip is made from a specially formulated ABS plastic with shear resistant . . .

MaxVelocity E36 M3 GTR Lip Spoiler -- The MaxVelocityGTR Lip Spoiler was designed to add an aggressive and bold look to the E36 M3. The GTR lip spoiler will lower the front by 1.5” allowing for a lower front stance with less air going underneath the car. The GTR lip is made from a . . .

MaxVelocity E36 M3 Evo I Track Splitter -- The MaxVelocity EVO I Track Splitter is next evolution to the successful and race proven HardCore Track Splitter for the E36 M3 (1995-1999). This splitter is made from ABS plastic with a shear resistant compound allowing the splitter to be flexible . . .

MaxVelocity E36 M3 Evo II Track Splitter -- The EVO II Track Splitter is a very functional aero aid for your E36 M3 track or race car.  This ABS molded part has a 3.25" front riser to lower the splitter and reduce air going under the car.  The full undertray extends back to the swaybar for . . .

E36 IT Front Splitter -- This splitter is an excellent solution for a front aerodynamic piece for IT E36 racecars and other E36 racers using the stock non-M front bumper. Cut air going under the car for increased front grip! Splitter bolts on (bolts not included) to bumper, . . .

E36 M3 Motorsport Front Splitter -- Original BMW Motorsport parts. The Motorsport front splitter adds significant front downforce, 4 positions available for adjustment. Standard equipment on the M3 Lightweight and Euro M3 GT. This package includes all required parts to mount on your . . .

Bimmerworld E46 Front Splitter/Undertray -- Made for our World Challenge cars, this composite construction front splitter will significantly increase front downforce while minimizing additional aerodynamic drag. Weighs under 5 pounds but is exceptionally strong - includes riser to fill center . . .

Carbon Dive Planes -- After a proper splitter, these pieces are the next step to add front downforce. The added aero will keep your car's front end planted so the front doesn't fade through the duration of a race - for just a little more than the cost of 1 race tire! Used . . .

E36 M3 Side Moulding Kit -- For use on all 92-99 E36 coupe and sedan cars. This kit replaces the thin standard strips with the wider, lower profile M3 parts. M3 logo in trim - "Motorsport International" and "Clubsport" door insert logos available separately.

BimmerWorld Carbon Race Wing -- The BimmerWorld Carbon Race Wing is designed to be the premium aero solution for a variety of BMW-specific applications.  This wing is a complete kit which is a direct bolt-on in most cases (unlike generic elements that require hours to make both . . .