Ground Control E46/Z4 Delrin/Alloy Font Control Arm Bushings

Purchase Ground Control E46/Z4 Delrin/Alloy Font Control Arm Bushings

The ultimate E46 track/race front control arm bushing!

Ground Control's E46 Alloy/Delrin control arm bushing set is a race product that offers minimal deflection by compromising NVH (Noise, Vibration, Harshness) considerably. With the added NVH, this bushing set is not suggested for street use. The design incorporates an outer anodized red alloy housing used as a friction element for the Delrin insert. The hex end of the control arm is sheathed by a anodized black alloy inner ring for the self-lubricating Delrin insert to ride against. This system creates a heavy duty solution that works extremely well in track and race atmospheres.

We offer the 66mm bushing and M3 bushing PRE-PRESSED into new housings for an easy install you can do you self with minimal tools. If you have a jack stand, 16mm wrench, and rubber mallet, you can do the swap yourself in your driveway with no need to take it to a service shop! If purchased pre-pressed in housings, your current housing diameter is not needed.

Most E46 3 Series cars have 66mm bushing housings. Cars produced before 2/01 had 60mm bushings initially, but were recalled in exchange for 66mm housings, bushings and upgraded control arms. If you currently have 60mm housings we offer the bushings in the 60mm diameter, but we suggest upgrading to our 66mm bushing and housing kit. (If you have a E46 produced before 2/01 and do not want the 66mm bushings pre-pressed into new housings, we suggest measuring your existing housings before ordering to confirm diameter.)

Priced per set

Purchase Ground Control E46/Z4 Delrin/Alloy Font Control Arm Bushings

Other products in the category Suspension / Steering / Solid/Spherical Race Components:

Ground Control Adjustable Camber/Caster Race Plates -- Manufactured by Ground Control, these race quality plates are slotted for independent adjustment of both camber and caster. Features like CNC machined aluminum housing, Aircraft quality spherical and needle bearings, and steel slider inserts . . .

Ground Control Adjustable Camber/Caster Plates - E30 Street Spring/Spec E30 -- True race quality caster/camber plate for use with stock style springs for E30 3 Series cars.  Manufactured by Ground Control, these plates are slotted for independent adjustment of both camber and caster. Features like a CNC machined aluminum . . .

Ground Control E30/E36/Z3 Front Control Arm Bearings -- Even upgraded control arm bushings allow some amount of front suspension movement. This is not optimum for tuning your suspension and driving for maximum performance. No race "look-alike". These spherical bearing replacements contain Aircraft quality . . .

Ground Control E30/E36/Z3 Delrin/Alloy Front Control Arm Bushings -- Even upgraded control arm bushings allow some amount of front suspension movement.  This is not optimum for tuning your suspension and driving for maximum performance. No race "look-alike".  These aluminum and Delrin replacements are the only . . .

Treehouse Racing "Eyeball" Control Arm Brackets -- Treehouse Racing Eyeball Arm Bracket/Bushings take the common performance control arm bushing to the next level. Made of precision CNC machined steel (E30, E36, Z3) or 6061-T6 aluminum (E46, Z4) with a self-lubricating nylon-moly bushing, these arms . . .

BWSport TrackCAB Solid Control Arm Mounts -- BimmerWorld's TrackCAB mount/ bushing hybrid set is designed for drivers needing a solid control arm mounting solution without the added maintenance of spherical joints. The forged bracket is designed to increase caster for better high speed stability, . . .

BWSport TrackCAB Solid Control Arm Mount Replacement Bushings -- Replacement Delrin bushing inserts for BWSport TrackCab solid control arm brackets. These bushings are available separately for customers who have worn their original Delrin inserts supplied with the kit. Sold per pair

E30/E36/Z3 Delrin Control Arm Bushings -- Delrin is a very hard, durable plastic, excellent for non-compliant suspension components. These bushings will stiffen your car's suspension, allowing less flex and geometry change which detracts from handling, especially in hard driving situations.  Fits . . .

BimmerWorld Strut-Mounted Adjustable Swaybar Links -- Our BimmerWorld adjustable swaybar links are the absolute best links available for properly fine-tuning your BMW's front swaybar setup. Our swaybar links are use the highest quality components available. The endlinks are 4130 heat treated, nickel . . .

E36 Race Front Control Arms -- Our E36 race control arms are precision machined so that each joint is exactly in the correct location. We have duplicated the geometry from our E36 World Challenge racecars which compensates for the dramatically lowered stance of most racecars to regain . . .

E36 Widebody/E46 Race Front Control Arms -- Our race control arms are completely precision machined using blank castings so that each joint is exactly in the correct location (not the case with factory arms!). We have duplicated the geometry from our World Challenge racecars which compensates . . .

GC Adjustable Bump Tie Rods -- Our exclusive racing tie rod ends allow the bumpsteer to be adjusted, by moving the tie rods up and down with spacers. This is similar to the pieces used by BMW factory teams, and they recommend that the rod ends be inspected every session, and replaced . . .

BWSport 3 Series Urethane-Isolated Spherical Shock Mount Kit -- Serious strength without the NVH! As we've come to learn, many of our customers use their daily driven BMWs for weekend track days as well. Therefore, we continue to supply parts designed to withstand the abuse of heavy track use while retaining . . .

Ground Control 3 Series Spherical Rear Shock Mounts -- With a lifetime warranty on our aluminum/urethane rear shock mounts (RSMs), you don't need these on your street car! However if you are looking for the ultimate in performance from a rear shock mount, look no further. RSMs are a common failure . . .

Moton Rear Clevis Mount Set - E30/36/46 -- CNC machined aluminum mounts required when using a coiled over rear configuration. Fits Moton and JRZ coil-over dampers. Sold as 1 pair.

E9X 3 Series (non-M)/E8X 1 Series GRAND-AM Legal Rear Subframe Bushing Set -- This rear subframe bushing kit is a critical upgrade for your track-car's performance handling. Designed and CNC machined using Delrin housings with aluminum inserts to meet the requirements for race sanctioning groups that require non-metallic suspension . . .

3 Series Aluminum Subframe Mount Sets -- Subframe movement will allow your entire rear geometry to shift, resulting in sloppy handling. These CNC'd machined solid aluminum mounts keep your suspension in precise alignment. Additionally, on high powered street cars, these bushings will reduce . . .

Rogue Engineering E9X M3 Adjustable Rear Toe Arm Set -- Rogue Engineering's E9X M3 adjustable rear toe arms are designed to allow greater tow adjustment for track oriented applications and/or better tire wear for lowered street cars. The arm is made of 100% machined and anodized, 6061-T6 lightweight . . .

Hotchkis E9X 3 Series (Incl. M3) Rear Camber Link Set -- Hotchkis E9X 3 Series Rear Adjustable Camber Links are absolutely necessary to maintain proper rear camber and reduce tire wear on the street and track.  The E9X 3 Series has an aggressive camber curve in bump travel which is especially noticeable . . .

Ground Control E36/E46 Adjustable Rear Lower Control Arm -- The flimsy stock lower rear control arms on E36 and E46 cars are good for street cars, but not optimum for track use. We carry Ground Control replacement rear arms. These parts are fully adjustable to achieve any needed rear camber - far beyond the . . .

Ground Control E36/E46 Premium Adjustable Rear Lower Control Arm -- These premium Ground Control rear lower control arms are designed as a heavy duty replacement of the stock, flimsy "salad tong" arms. The Ground Control arms incorporate a sealed inner bearing for extended use, street and track. The arm set uses . . .

Ground Control E36/E46 Street/Track Adjustable Rear Lower Control Arm -- Chrome moly racing rear control arm, designed to suit 2006 BMWCCA rules changes. Urethane bushing, with grease fitting, turnbuckle adjustable to achieve any needed rear camber - far beyond the range of adjustability for the factory arm. Double sheer . . .

E36/E46 Rear Control Arm Bearings -- When tuning a suspension, the movement of the entire chassis and suspension components must be taken into account. Installing solid spherical suspension mounts completely eliminates unwanted flex, allowing far more precise suspension tuning and faster . . .

E36/E46 Trailing Arm Bearings -- Also called toe bushings, these are a common failure item on 3 Series cars. The poorly designed webbed rubber stock bushing deteriorates rapidly under hard driving and track conditions, resulting in toe changes indicated by a "floating" rear-end or, . . .

E36/E46 3 Series Rear Articulating Spring Perch/Weight Jack -- This new Ground Control piece makes life a lot easier at the track. Recommended for race use only, this is a rear adjustable height spring perch for the stock location. Bottom adjustment means you can now cornerweight your car as it is loaded on . . .