INVENTORY BLOWOUT - Genuine BMW '96-'99 M3 Front Spindles

Needed for E30 5-lug conversions or upgrading your E36 to M3 brakes

Purchase INVENTORY BLOWOUT - Genuine BMW '96-'99 M3 Front Spindles

Genuine BMW front spindle assemblies for '96-'99 E36 M3 applications. These spindles can be used as a standard replacement piece for '96-'99 M3s or for E36 non-M cars when doing a M3 brake upgrade. Also, E30 non-M enthusiasts are constantly looking for these spindles when doing a 5-lug conversion.

Brake components, struts, and hubs are also available but sold separately.

Sold per spindle.

Purchase INVENTORY BLOWOUT - Genuine BMW '96-'99 M3 Front Spindles

Other products in the category Suspension / Steering / Stock Replacement/Performance:

BimmerWorld E46/Z4 Front Suspension Overhaul Kits -- As early as 50k miles, a E46 3 Series and Z4 can develop worn control arms and/or bushings. As any E46 3 Series or Z4 owner knows, a worn set of front control arms and bushings can play havoc on the handling and tire wear of your vehicle. Genuine BMW . . .

BimmerWorld E30/E36/Z3 Front Suspension Overhaul Kits -- BimmerWorld's front suspension overhaul kits are designed to bring your worn front suspension back to new (or even better than new)! Our kits are comprised of products we know work well and have sold for years with excellent results. With our new overhaul . . .

BMW Motorsport X Brace

Front Strut Mounts - Camber Correcting and Stock -- We carry several types of factory front strut mounts (or guide support bushings). The camber correcting mounts, or "crash mounts" were originally designed to restore alignment in wrecked cars, but can also . . .

Meyle HD and Replacement E46 3 Series/Z4 Front Control Arm Bushing Sets -- The E46 3 Series (1999-2006) and E85/6 Z4 (2002-2008) have pre-mature wear issues with the factory front control arm bushings that can create a shuttering steering wheel under braking and uneven tire wear. This bushing is located at the back of . . .

Motorsport-Replacement E30/E36/Z3 Rubber Front Control Arm Bushing Sets -- Great for stock replacement or a little added performance! Replacement factory bushings from E30/E36 M3 cars can be used in any street driven E30/E36/Z3 car to increase performance. Bushings are made of rubber for excellent isolation characteristics . . .

E46 Xi AWD 3 Series Front Control Arm Center Ball Joint/Bracket Set -- Replacement OEM supplier control arm bracket with ball joint. Fits all E46 3 Series Xi models. Sold in pairs ONLY.

3 Series (Including Z3/Z4) Front Control Arms -- We have a great selection of front control arms for 3 Series(Including Z3/Z4) models from '84-'09, fitting any type of need or budget- street and track. The BMW 3 Series front suspension is a basic, durable design incorporating a lower control arm* . . .

Genuine BMW Motorsport E9X 3 Series/E8X 1 Series Front Wishbone Upgrade Set -- This highly suggested, simple installation will reduce understeer and increase steering feedback for improved performance for any* E9X 3 Series or E8X 1 Series.� As the BMW community has found out, the new 1 and 3 Series pack a lot of power and . . .

5/6/7/8/X5 Series Thrust Rods (Upper Control Arms) -- The thrust arms on BMW 5, 6, 7, 8, and X5 series cars incorporate a large bushing that is designed to remove vibration from the front steering while controlling loads from the tire. This soft bushing naturally wears prematurely, causing sloppy . . .

5/6/7/8/X5 Series Track Rods (Lower Control Arms) -- The track (lower) arms on BMW 5, 6, 7, 8, and X5 series cars can become worn as early as 90k miles and will need to be replace to ensure the original driving characteristics of your BMW. The arm includes the inner rubber bushing and outer ball . . .

X5 Front Thrust Arm Ball Joint -- Unlike most BMWs, the X5's front thrust control arm does not include the ball joint. In this particular case, it is mounted to the hub and the arm is then secured to it. We suggest replacing this ball joint anytime you replace the thrust control . . .

Meyle Heavy Duty Front Swaybar Links -- Our Meyle Heavy Duty front swaybar links incorporate solid metal ball joints for increase life over the stock plastic swaybar link joints. Meyle Heavy Duty parts come with a 4 year warranty. PRICED PER LINK - 2 links needed per axle . . .

Tie Rods -- Replace worn or broken tie rods with new OEM quality parts. We recommend replacing complete tie rod assemblies. Sold as complete assembly.

E30 Camber Correcting Offset Trailing Arm Bushing -- Offset bushing set allows you to set rear camber and alignment. This is an offset, non-adjustable piece. Bushing set includes two bushings for ONE rear arm - order TWO sets to do both sides of the car.

E36/46 Trailing Arm Bushing -- Fits all E36 cars except 318ti, TWO REQUIRED PER CAR.

"LIFETIME" E30/E36/E46 3 Series Rear Shock Mount Set -- The rear shock mount is the weakest bushing on the 84 and up 3 Series cars. BMW has gone through more than 5 generations of designs, and the newest mount is still prone to failure. This replacement mount based on the popular JTD performance rear shock . . .

Genuine BMW Motorsport E9X 3 Series/E8X 1 Series Rear Control Arm Upgrade Set -- As the BMW community has found out, the new 1 and 3 Series pack a lot of power, and can easily be increased with aftermarket help to levels above the M3! With that in consideration, there is a need for serious suspension performance to match. This . . .

Genuine BMW Motorsport E9X 3 Series/E8X 1 Series Rear Subframe Mount Upgrade Set -- Upgrading your E9X 3 Series or E8X 1 Series to Genuine BMW E9X M3 rear subframe mounts is one of the absolute best ways to improve rear stability and grip. The factory non-M bushings have a considerably weak design and cannot withstand the . . .

Rear Lower Control Arm -- Quality Lemfoerder parts. Fits all E36 and E46 3 Series, except 318ti.

Reinforced Rear Lower Control Arm -- The rear lower control arms are one of the weaker items on your BMW's rear suspension. These quality Lemfoerder arms have been reinforced on both sides to strengthen the flimsy stock arm. Fits all E36 and E46 3 Series, except 318ti. Legal in BMW . . .

BMW Front Hub Assemblies -- Sold per each - 2 required per car. Please email for additional fitments. *E30 M3 cars can use the E28 front hub. The ABS sensor rings are different and must be swapped on install. **Due to changes in hub specs from BMW, Performance Friction Direct . . .

Rear Wheel Bearing -- Sold per each - 2 required per car. Please email for additional fitments.

Power Steering Reservoir -- Stock replacement part. Fits most BMW models.

Power Steering Hose - Fluid Reservoir to Pump -- Please call for models not listed

E46/Z4/X3 Front Differential Mount Set -- This is a front differential mount set suggested for replacement while upgrading to our heavy duty rear diff mount. These front mount locations can be worn as well, though typically not as bad as the rear location. We have 2 different mount choices, "OEM" . . .

Meyle Heavy Duty E46/Z4/X3 Rear Differential Mount -- When you hear the "thud", your rear diff mount's a dud! Our heavy duty� rear differential mount is the best upgrade for your current worn unit. The original mount in this particular location wears prematurely and can cause a heavy "thud" during . . .

OEM E36 Differential Front Mount -- The OEM E36 differential front mount is a durable design, and hasn't necessarily needed further R&D by the aftermarket, except in race applications were solid mounting is preferred. Because of this, we suggest replacing your worn diff mount with a . . .

OEM E36 Differential Rear Mount Set -- The OEM E36 differential rear mount is a durable design, and hasn't necessarily needed further R&D by the aftermarket, except in race applications were solid mounting is preferred. Because of this, we suggest replacing your worn diff mounts with OEM . . .