Solid Brake Guide

Eliminate caliper twist on track cars (stock calipers)

The best brake upgrade you can buy for your BMW! Eliminate caliper twisting caused by rubber guide pin bushings in a stock single piston caliper (see picture). These kits, consisting of precision guide pins and machined brass guide bushings, will allow your calipers to squeeze evenly on both sides of the brake rotor - just like expensive multi-piston big brake kits. Results in significantly longer pad life and more consistent brake system feel.

Fits all BMW single piston calipers made by ATE. Exceptions include E9X M3 (2008+), 135 front 6-piston calipers, 4-piston calipers found on the front of the E28 M5 and 850csi, and Girling front calipers on E30 318/325 cars. Please verify legality if used for racing, not SCCA ITS legal.

Order by axle quantity - 1 kit covers 2 calipers

Purchase Solid Brake Guide

SKU: SBG_w.Instr

Other products in the category Brakes / Performance Components:

SPECIAL - E36 Motorsport Front Brake Kit (92-99 3 Series and all Z3) -- We have purchased a large overstock of these parts from a manufacturer - help us clean out our overstuffed warehouse and pick up an impressive bit of braking performance for your car as well! All parts are factory new and either Genuine BMW or . . .

Bimmerworld Evo Stainless Steel Brake Lines -- As in any performance application, replacing squishy rubber parts with a performance piece will increase response and feel - brakes are no different. Stock rubber brake hoses (4-6 per car) expand under pressure, requiring increased fluid volume . . .

Goodridge Stainless Brakelines - CLOSEOUT -- These premium quality stainless brakelines are made from Teflon lined stainless steel hose to fit each specific BMW application perfectly. Goodridge is the leading race fitting manufacturer and we use their products for all of our race applications. . . .

Titanium Thermal Barrier Plates -- Heat is required in a brake pad to work properly in performance applications. But when this heat bleeds from the pads and rotors into the rest of your braking system, performance goes down. This is often indicated by a soft pedal as the fluid . . .

Stainless Steel Brake Caliper Pistons -- Replace worn or pitted pistons at the same time calipers are rebuilt. Sold in pairs only.

Brake Cooling Kits -- Cooling your brakes prevents fluid boil, pedal fade, and drastically reduces pad and rotor wear and occurrence of rotor warpage. Our Brake Ducting Systems force-feed air into the center of your front . . .

E46 Carbon Brake Ducts -- Extremely lightweight, quality autoclaved carbon. Fits E46 M3 and all E46 with M Sport front bumper. Priced per pair.

Brake Temperature Paint -- 0-1239deg F reading range, color guide, instructions, cap/brush included. Quick drying, use on any metallic surface.

E30 25mm Master Cylinder Kit -- Originally designed for the E30 M3, 325 version now available. Replaces the stock E30 M3 23mm master cylinder to increase brake pedal sensitivity and decrease travel, E30 325 stock specs differ. Kit includes master cylinder, custom fitted brake line, . . .