SSI Stealth Underpanel - E36 3 Series

Replace the multiple sections of broken plastic under the front of your E36 with this solid one-piece assembly

Purchase SSI Stealth Underpanel - E36 3 Series

The Stealth Underpanel is the culmination of many hours of problem solving geared towards the e36 front bumper assembly. The stock plastic under tray and pork chops used to protect the engine from road debris and reinforce the bumper cover have a habit of ripping away from the car at speed, when bumped into curbs or over speedbumps, or from age in general.

Using 3D Solidworks computer design and a bit of effort, SSI has created a much more sturdy, one-piece design made from a special UV stable, crinkle finish, black polyethylene. The material not only is very attractive, but is made to withstand harsh extreme environments and will flex but not bend or shatter on impact even in very cold weather. Now it would nearly require a front end collision to remove it!

The Stealth Underpanel will end your need to think about the underside of your front bumper. Not only will it make your front end look whole again and improve its aerodynamics over the missing pieces, but it will keep out the rocks and road debris which can damage the engine�s belts, pulleys, and other vital components. Lowered cars benefit even further with the added ground clearance.

Fits all 92-99 E36 3 Series cars. Kit comes with all hardware, parts, and instructions, and takes approximately 30 minutes to install using a Philips screwdriver, 7 & 8 mm sockets, and a drill with a 1/8^� bit.

View Installation Instructions

Purchase SSI Stealth Underpanel - E36 3 Series

Other products in the category Body / Aero:

BMW Roundel Emblem -- Replace the lost, stolen, or faded BMW emblem on your car. NOTE: Some Roundel emblems are additional charge - we will notify you for approval before changing the part used for your application.

BMW Motorsport "M" Emblem -- Genuine BMW part, adhesive backing.

E36 M3 Front Bumper Strip - "BMW" Logo -- Genuine BMW part - not for use with front license plate.

E30 and E36 Foglight Blank Plates -- Gray plastic - can be painted or left gray. Sold in pairs. E30 model fits only 9/87-92 cars, except M3 E36 model fits all E36 cars

Hood Shock -- OEM gas shocks to replace the tired shocks that constantly drop the hood on your head. Sold each - some cars require two.

OMP Captive Hood Pins -- All hardware included, drilling required. Includes one pair.

Vorsteiner E9X M3 Carbon Fiber Aero Program -- Aggressive style and performance for your E9X M3 - only from Vorsteiner! Vorsteiner's E9X M3 aerodynamics program is designed to increase the aggressive looks of your M3 while reducing weight and increasing down force for high speed stability. Vorsteiner . . .

Vorsteiner E9X 3 Series Carbon Fiber Aero Program -- Aggressive style and performance for your E9X 3 Series - only from Vorsteiner! Vorsteiner's E9X 3 Series aerodynamics program is designed to increase the aggressive looks of your 3 Series while reducing weight and increasing down force for high . . .

Vorsteiner E46 M3 Carbon Fiber CSL Style Aero Program -- Aggressive CSL style and performance for your E46 M3 - only from Vorsteiner! Vorsteiner's E46 M3 CSL style aerodynamics program is designed to give your M3 a very accurate M3 CSL (European market only) look while reducing weight and increasing . . .

E30 Stock Front Valence/Splitter -- This piece comes in two styles, which are interchangeable: Standard - approximately 1" in height "is" Style - approximately 2.5" in height Fits E30 cars (except M3) 9/87 and newer, convertible 10/90+.

E30 M3 Evo II Front Chin Spoiler -- Attaches to the existing front bumper cover, increases front downforce. Standard on the Euro E30 M3 Evo II. Genuine Motorsport part, unfinished. Mounting hardware included.

E36 M3 Side Moulding Kit -- For use on all 92-99 E36 coupe and sedan cars. This kit replaces the thin standard strips with the wider, lower profile M3 parts. M3 logo in trim - "Motorsport International" and "Clubsport" door insert logos available separately.

MaxVelocity E36 M3 Velocity Splitter -- Made from ABS plastic for durability and longevity, the Velocity Splitters are one of the best and easiest modification you can make to the appearance of your E36 M3. They give your M3 a lower, and more aggressive look but it doesn't end there!� . . .

MaxVelocity E36 M3 RS Lip Spoiler -- Add a more aggressive look to your 1994-1999 M3!� The Max Velocity RS lip spoiler will give your M3 a more distinct and sportier look without sacrificing drivability. The RS lip is made from a specially formulated ABS plastic with shear resistant . . .

MaxVelocity E36 M3 GTR Lip Spoiler -- The MaxVelocityGTR Lip Spoiler was designed to add an aggressive and bold look to the E36 M3. The GTR lip spoiler will lower the front by 1.5� allowing for a lower front stance with less air going underneath the car. The GTR lip is made from a . . .

MaxVelocity E36 M3 Evo I Track Splitter -- The MaxVelocity EVO I Track Splitter is next evolution to the successful and race proven HardCore Track Splitter for the E36 M3 (1995-1999). This splitter is made from ABS plastic with a shear resistant compound allowing the splitter to be flexible . . .

MaxVelocity E36 M3 Evo II Track Splitter -- The EVO II Track Splitter is a very functional aero aid for your E36 M3 track or race car. This ABS molded part has a 3.25" front riser to lower the splitter and reduce air going under the car. The full undertray extends back to the swaybar for . . .

Evo II Track Splitter - Standoff Mounting Kit -- In a race/track environment, a lower splitter is great for downforce, but it will be damaged on occasion during an off-track excursion. If the splitter is attached to your bumper cover, it will take your bumper (and paintjob) with it, leading to . . .

BimmerWorld Carbon E36 Splitter/Undertray -- The BimmerWorld Carbon E36 Splitter/Undertray was created to balance the huge downforce levels generated, even at low speeds, from our Carbon Race Wing.� This splitter maximizes rules for BMW Club Racing, but is an excellent part for other race . . .

E36 IT Front Splitter -- This splitter is an excellent solution for a front aerodynamic piece for IT E36 racecars and other E36 racers using the stock non-M front bumper. Cut air going under the car for increased front grip! Splitter bolts on (bolts not included) to bumper, . . .

Bimmerworld E46 Front Splitter/Undertray -- Made for our World Challenge cars, this composite construction front splitter will significantly increase front downforce while minimizing additional aerodynamic drag. Weighs under 5 pounds but is exceptionally strong - includes riser to fill center . . .

Carbon Dive Planes -- After a proper splitter, these pieces are the next step to add front downforce. The added aero will keep your car's front end planted so the front doesn't fade through the duration of a race - for just a little more than the cost of 1 race tire! Used . . .

BimmerWorld Carbon Race Wing -- The BimmerWorld Carbon Race Wing is designed to be the premium aero solution for a variety of BMW-specific applications. This wing is a complete kit which is a direct bolt-on in most cases (unlike generic elements that require hours to make both . . .

E90 Front Lip Spoiler Set -- These are the Genuine BMW spoiler pieces. We also include the adhesive at no additional charge. Price is for 1 complete kit.

E90 3 Series Sedan Rear Deck Spoiler -- BMW says it "intensifies the look of power and performance". We think it looks cool. Easy 5 minute install with pre-applied adhesive strip - no holes or permanent modification required. Adds a nice look to the car. Sedan fitment only