- Dry Boiling Point = 312° C (594° F)
- Wet Boiling Point = 205° C (401° F)
- "Super" DOT4 (exceeds DOT5 specs)
- Normal viscosity
- 500mL bottle
Motul Racing Brake Fluid is a superior fluid to other off-the-shelf performance and racing brake fluids. The RBF600 has boiling points that exceed DOT4 standards. It has been specifically designed to resist the high temperatures generated from steel or carbon racing brakes and clutch systems. High boiling points help to avoid vapor lock caused by fluid boiling. Motul RBF 600 far exceeds DOT 3 and DOT 4 standards, and the container is filled with nitrogen in order to increase shelf life and eliminate contamination as long as the factory seal remains in place. As with any brake fluid, its quality is only as good as its freshness. That's why it's important to change your brake fluid often, especially with regular track use.Normal or Low Viscosity?
track or race cars a Normal Viscosity fluid is suitable even if the factory fluid was a Low Viscosity (emphasis on "dedicated"). At track temperatures all types of brake fluid thins out and the viscosity becomes closely comparable. A NV fluid will always be slightly thicker than LV but the viscosity is close enough that you won't likely notice a difference at track temps. For mixed street-track or full road use you should use whichever fluid came from the factory. At cooler temps the viscosity difference between Normal and Low is very large. To maintain proper ABS and DSC operation you must use the appropriate fluid. Cars with DSC use the Low Viscosity; cars without DSC (or with ASC+T) use Normal Viscosity. You have DSC if you have the "DSC" button on your dash or center console.
If you have any questions on which brake fluid to use on your BMW, give one of our experts a call at 877-639-9648.