M14 Street 90mm BimmerWorld Wheel Stud/Black Nut Package

Our BimmerWorld Black 5 Lug Wheel Stud Package for BMW F-chassis cars is designed specifically for street enthusiasts looking for strong wheel hardware at a reasonable price. 

These 90mm studs are typically used in conjunction with wheel spacers from 18mm  to 20mm thickness. 

Our wheel studs are made from 10.9 grade 39NiCrMo3 steel, similar to the quality of original wheel hardware. The studs have a black zinc-nickel electroplating for long life and good looks. Our bullet nose tip design makes for quick and easy thread starts, and the added length is designed to incorporate 18mm to 20mm in spacer thickness while retaining full thread penetration at the nut. The black wheel nuts are zinc coated to resist corrosion, and they have a M14x1.25 thread and 60 degree taper to fit all BMW-applicable wheels.

Fits almost all F- and G-chassis models - F8X (F87, F80, F82), G8X (G87, G80, G82), F3X (F30, F31, F32, F33, F34, F36), F22, G42, G2X (G20, G22, G26), G29, A90 Supra, F10, F13, F92, and others that use the M14x1.25 thread pitch.

BimmerWorld Stud Package includes:

• M14x1.25 90mm wheel stud x 20
• M14x1.25 17mm black wheel nut x 20
• Red Loctite 271
• M14x1.25 Grade 8 nuts to install studs x 2

Made in Italy.

“What is the BMW wheel nut torque?” Our torque spec for M14 wheel nuts (not bolts) is 90ft-lbs done when the nuts and wheel are cold (ambient temp). Do not torque when the nuts are hot and do not exceed 90ft-lbs. Remember that nuts - and studs - are consumables and should be inspected and replaced periodically. See our instructions link above for complete stud and nut installation guidelines.