KMP Racing Steering Wheel - F8X M3/M4 DCT

Track-focused wheel and adapter for dedicated track cars.

+ -
+ -
+ -
+ -
+ -
+ -
+ -
+ -

  •   
      
  •  

Price:
$2,009.99 – $2,219.99

An all-business F80 M3/F82 M4 steering wheel for the no-nonsense driver.

Dedicated racing steering wheels hold several advantages over stock, factory wheels - they are lighter and simpler, smaller for quicker steering reaction, with better grip for driving gloves. But removing a stock wheel on a modern BMW creates havoc with the vehicle electronics and airbag sensors. KMP Drivetrain of The Netherlands has reverse-engineered the communications and pass-through controls needed to use a racing steering wheel with no errors and faults.

KMP Wheel Features:
+ 330mm diameter (OMP Targa wheel)
+ Fixed or Quick Release hub (Krontec QR)
+ Almost Plug & Play connection means no errors or coding required
+ OE connections between wheel and hub suppress cluster error lights
+ Paddle shifters have a more mechanical feel than factory paddles
+ Button panel with programmable* functions
+ No permanent modifications - fully reversible back to stock

* - Customize your wheel:
Connector Options: fixed 44mm hub or quick-release hub
Spec Options: with "free" un-programmed buttons or with M1/M2 and DTC buttons (plus one free button)

If you select the "with Free Buttons" option, you will receive a wheel with all buttons un-programmed for you to configure as you wish. The buttons use a switched to ground connection so no power is run through them. Wires are terminated with BMW factory socket pins and routed through the hub and ready for connection. For track use we suggest wiring buttons for data display, flash-to-pass, radio, map switching, or other functions if you have deleted the column stalks. When using an AiM dash you will also need the AiM Remote Button Interface (see link below). KMP can laser engrave the button functions if you're set on their function. However, our advice is to skip the laser engraving in case functions change in the future. Custom engraving will add cost and delivery time to your order.

Some very minor wiring work is required. This involves removing pin(s) from original connectors and re-installing them in new, supplied connectors. Small screwdrivers or pick tools will be required. Cutting, splicing, or soldering is not required for most OEM functions unless your wheel options call for it.

This wheel is also available with the OMP Superquadro flat-bottom design. Other steering wheels may be compatible. Please inquire for a custom order.

This product is sold only for racing, competition, track, hobby, or other off-road use. It's use is prohibited in any motor vehicle that is subject to safety inspection or control. The mounting hub is a solid, non-collapsible design. Removing the airbag is a serious safety risk and should never be done when stock 3-point seat belts are still in use. 4 or 6-point racing harnesses must be used instead. The smaller wheel rim may block the stock instrument cluster depending on seating position. Legal only for racing vehicles that may never be used, or registered or licensed for use, upon a public highway.

BMW Fitments:

3 Series
F80 (15-19) > M3 DCT
4 Series
F82 (15-21) > M4 DCT
Recently Viewed Products