BimmerWorld Carbon Fiber Doors (Pair) - E46 Coupe
Tremendous weight savings with stock door operation!
These carbon fiber doors are only about 7lbs each - and surprisingly rigid! The doors are a tremendous weight savings opportunity in your race car. They are usually gutted and stripped of all internal pieces for weight savings and simplification, which is a time consuming process. And the finished door will never be as light as this piece. No other carbon fiber doors we have seen are as light or as strong as these motorsport-grade pieces.
These E46 carbon doors are Made in the USA for BimmerWorld by a composites manufacturer with years of racing experience. These are a true replacement for your stock doors and re-use the original hinges, exterior handles, and mirrors. The door includes an outer skin and a partial inner skin. There is no provision for the window mechanism. The interior cavity of the door is open and may fit around or be trimmed to fit with most NASCAR door bars or cross braces. A certified racing cage is required (no side impact bar is included) and these will not be sold for street cars.
BimmerWorld race carbon parts are designed solely to improve performance. Surface finish and appearance are not priorities in our racing parts. Carbon may be unfinished or sometimes with a minimal clearcoat (for UV protection). You will not find high gloss finishes here for style points. If your priorities are a show car shine there is no shortage of cheaper carbon-wrapped fiberglass or plastic pieces on the market. These are usually loaded with fiberglass, filler, resin, and many clearcoat layers that make them too heavy or not rigid enough for real world competition use. If you wish to apply a finish we suggest vinyl wrap or a light filler skim coat and then paint. In any case, professional prep and installation are strongly advised. Our carbon pieces are Made in the USA by a composites manufacturer with years of top-level motorsports expertise.
This is a racing part for motorsport use and certain attributes normally found in street parts have been eliminated. For finishing, we recommend vinyl wrap or paint with additional surface prep and a clearcoat layer.
BMW fitments -
E46 (99-00) : 323ci
E46 (01-06) : 325ci
E46 (99-00) : 328ci
E46 (01-06) : 330ci
E46 (01-06) : M3