E36 Carbon Headlight Blank - Left

E36 Carbon Headlight Blanks were designed because shedding weight is the easiest way to make your car faster, and the more weight you can take off from the front of the car, especially ahead of the front axle centerline, the better. 

With some headlight/sidemarker versions weighing over 20 pounds per side, getting rid of the dead weight can be very beneficial, and since our carbon replacement parts are an exact duplicate of the stock contour, you'll retain your factory aerodynamics and smooth appearance as well.

This headlight blank is a professional-quality race part, autoclaved for maximum strength and minimum weight - this is not a cheap fiberglass plug. They also retain your factory headlight attachment points for a perfect fit.

Sold per side - replacement for left headlight only.    

NACA duct available for a ducted solution to your intake.

Made in USA

BimmerWorld race carbon parts are designed solely to improve performance. Surface finish and appearance are not priorities in our racing parts. Carbon may be unfinished or sometimes with a minimal clearcoat (for UV protection). You will not find high gloss finishes here for style points. If your priorities are a show car shine there is no shortage of cheaper carbon-wrapped fiberglass or plastic pieces on the market. These are usually loaded with fiberglass, filler, resin, and many clearcoat layers that make them too heavy or not rigid enough for real world competition use. If you wish to apply a finish we suggest vinyl wrap or a light filler skim coat and then paint. In any case, professional prep and installation are strongly advised.