Motul RBF 600 Super DOT4 Racing Brake Fluid

High performance Normal Viscosity fluid for street or track use. 593°F wet boiling point.

+ -
+ -
+ -
+ -
+ -
+ -
+ -
+ -

  •  

Price:
$17.99

  • Dry Boiling Point = 312° C (593° F)
  • Wet Boiling Point = 216° C (420° F)
  • "Super" DOT4 (exceeds DOT5 specs)
  • Normal viscosity
  • 500mL bottle
Motul Racing Brake Fluid is a superior fluid to other off-the-shelf performance and racing brake fluids. The RBF600 has boiling points that exceed DOT4 standards. It has been specifically designed to resist the high temperatures generated from steel or carbon racing brakes and clutch systems. High boiling points help to avoid vapor lock caused by fluid boiling. Motul RBF 600 far exceeds DOT 3 and DOT 4 standards, and the container is filled with nitrogen in order to increase shelf life and eliminate contamination as long as the factory seal remains in place. As with any brake fluid, its quality is only as good as its freshness. That's why it's important to change your brake fluid often, especially with regular track use.

Normal or Low Viscosity? For the track it's always Normal Viscosity brake fluid. This is because Low Viscosity fluids will be too thin once exposed to typical track temperatures. For regular road and street use, however, you should use whichever fluid came from the factory. For the street if your BMW has "DSC" (Dynamic Stability Control) you should use Low Viscosity (LV) fluid. You have DSC if you have the DSC button on your dash (note: ASC is different and uses Normal Viscosity fluid). If your car does not have DSC use Normal Viscosity fluid.

If you have any questions on which brake fluid to use on your BMW, give one of our experts a call at 877-639-9648.
Recently Viewed Products