This Pagid OEM-quality rotor fits the Front of the F10 535i/535iX and F06-F13 640i/640iX. This part number
fits standard 535i brakes, not the optional High Speed Brakes package. This rotor is 348mm x 30mm (same diameter but 6mm narrower than the High Speed Brakes). This is a 2-piece rotor with an aluminum center hat to save a little bit of weight.
The factory BMW rotor is a 2-piece iron disc with an aluminum hub. BMW advertised the lighter weight as a way of lowering emissions and improving fuel economy. However, BMW has elected not to sell their branded 2-piece rotor in the US any more (replaced by BMW part #34116884301). This is the OEM version of the same rotor, from the original manufacturer. The only difference is the lack of a BMW logo.
High Speed Brakes
The F10 535i was offered with a "High Speed Brakes" option (option code S5AEA) which used the stock rotors and calipers from the heavier and faster 550i. Although a rare option, we encourage 535i owners to check their brakes before ordering to ensure the correct parts are supplied. There are two ways to tell if you have the High Speed Brakes option: the front rotors are directionally vented (the cooling vanes sweep towards the rear) and the rear rotors are 345mm (13.58") instead of 330mm (12.99"). If in doubt, you can contact us with your VIN and we can check for you.
BMW Fitments:
5 Series
F10 / F11 (11-16) > 535d
F10 / F11 (11-16) > 535d xDrive
F10 / F11 (11-16) > 535i
F10 / F11 (11-16) > 535i xDrive
F10 / F11 (11-16) > Hybrid 5
6 Series
F12 / F13 (12-18) > 640i
