PFC Z45 Front Big Brake Kit - E36 M3, MZ3

Front Z45 4-piston competition-proven brake kit

+ -
+ -
+ -
+ -
+ -
+ -
+ -
+ -

This kit has been discontinued - BUT we now have an excellent replacement! Please see the StopTech C43 line for an ultra-light sport/track/race setup. See BimmerWorld part # 83.131.D600.xx (for Street) or 87.131.D600.xx (for Race)

  • This item is no longer available.

Price:
 Free!

One of the finest big brake kits available on the market, designed specifically for BMW performance enthusiasts and racers.

Performance Friction’s E36 M3/MZ3 Front Brake Kit is designed specifically for your BMW! Without question, the PFC Z-Rated brake kit is the best on the market, and that conclusion comes from years of racing domination, not the marketing desk. Unlike other brands whose street kits have only the name in common with their top level racing components, these are the real deal PFC parts that win championships across the board in top-level professional series like Tudor, GRAND-AM, World Challenge, WTCC, Australian V8 Supercars, and the list goes on…

The E36 M3 and MZ3 kit was specifically designed to meet the needs of the BMW performance enthusiast and racer. Brake bias is moved slightly to the rear for improved braking performance in both front-only and 4-wheel applications.

Calipers

Performance Friction calipers all start life as a billet aluminum block, machined into a one-piece monobloc caliper. These are not the sand-cast calipers used by many other manufacturers and are therefore both lighter and stronger than anything on the general market.

Z45 Front Caliper (4-Piston, 2-pad) - The Z45 caliper starts life as a PFC monobloc, but in the final machining stages is cut in half - originally done to meet rule requirements for GRAND-AM racing which required a 2-piece caliper. Caliper maintains incredible stiffness even with an open bridge due to oversized mil-spec fasteners and a structural bridge bar (not a flimsy bridge push-pin). 

(BMW CCA CR Prepared legal).  

Calipers are anodized black and then powder coated in your selection of color. Custom colors are available for an additional cost with a 6-8 week lead time.

Notes on Piston Envy: Performance Friction takes their top-level racing technology and applies it to everything they design, so every component that comes from their South Carolina manufacturing facility performs at the highest level possible. A properly-designed 4-piston PFC caliper is lighter and has better release characteristics than a similar 6-piston piece. PFC calipers are all made with a maximum of four pistons with the exception of a NASCAR-mandated 6-piston design - which is outperformed by its 4-piston counterpart. If you’re trying to impress piston counters, there are much cheaper ways to do it. If you want the best performing brakes you can buy, look no further.

Rotors
The Performance Friction rotors used in all kits are the newest V2 Direct Drive Rotors. Made from a precision casting, all external surfaces are machined to tolerances of 0.004", including the OD of the vein area that most manufacturers leave rough-cast. These are the only rotors that are mechanically, thermally, and dynamically balanced, which means you will never warp them because they remain balanced in all situations and at all temperatures. New V2 hardware reduces weight an additional half pound from the already light V1 components. Front rotors are 323x32mm - properly sized to maximize performance and reduce weight commonly added with overkill kits.

Kit also includes PFC Z-Rated high-performance brake pads and the required stainless brake line set.

This kit is vastly superior to de-contented kits for street and race applications made by other manufacturers. 

  • Finest big brake kit on the market
  • Genuine championship winning parts
  • Peerless caliper design
  • Unparalleled rotor design
  • Ideal for street cars to all-out race cars

Note: If you have specific questions or would like a more in-depth explanation of features, please call one of our experienced technical sales reps for more information.

INSTALL NOTE:  Due to space requirements and casting inconsistencies, you may need to clearance the outer edge of your front control arm to provide rotor clearance when installing this brake kit.  We suggest 1.5mm of clearance, through the full range of steering input.

Made in USA



BMW Fitments:


3 Series
E36 (92-99) > M3 (1995)
E36 (92-99) > M3 (96-99)
Z Series
E36/7 / E36/8 Z3 (96-02) > Z3 M - S52
E36/7 / E36/8 Z3 (96-02) > Z3 M - S54
Recently Viewed Products