Rear Pagid RST2 Racing Brake Pads (18mm) - F87 M2 Competition, Brembo F40/F50

Pagid RST Red brake pads are formulated for iron discs on F87 M2 Competition (rear), M2 CS Racing (rear), and Brembo F40/F50/B/H/GT1/Monobloc P Caliper calipers. 

Fitment note: Not for Euro-spec M2 Competition. For US-spec M2 Comp only (Euro-spec / Non-US M2 Competition models the same pads as a F80 M3 or F82 M4 unless the car was optioned with S2NH brakes (silver calipers, 6-piston front, 4-piston rear).

Brembo F40/F50/B/H/GT1/Monobloc P Caliper calipers are a 4-piston caliper that formed the basis for most Brembo GT big brake kits found on many sports cars. These were mainly used on the front axle but could be found on some rear applications. They are commonly known as Brembo “F40” calipers.

The RST2 compound is a semi-metallic resin bonded material containing steel fibers. This compound has medium-high friction levels with a progressive torque that tapers at extreme temperatures. Initial bite is high and modulation is good. This is a common rear pad compound when combined with an RST1 front pad. Common applications include rally, stock car, or GT racing with lots of aero or where high temps are an issue.

Pagid RST2 Characteristics
+ medium-high friction level (depending on operating temp)
+ excellent fade resistance
+ progressive torque that peaks at 400°C
+ higher pad and disc wear compared to RSL pads
+ very high initial bite

Front and rear brake compounds should be closely matched to maintain brake balance. Never upgrade one axle and not the other.

As a competition pad, there is no slot for the pad sensor and you will have to monitor pad wear visually. The sensor can be removed or tied back out of the way.

Pagid Racing supplies many of the top teams in international motorsport in addition to their work as a technical partner with several factory racing programs (including BMW Motorsport). Pagid Racing engineers motorsport products that achieve the highest performance levels by offering multiple products and compounds to suit a wide range of needs and conditions. All Pagid Racing brake pads are engineered, developed, and manufactured in Germany.