Hawk's HPS 5.0 Street Brake Pads are highly regarded for their ability to increase the stopping power of your street car. Hawk's exclusive Ferro-Carbon formula was developed specifically for good street performance by utilizing the safety and quality of aerospace and motorsport severe-duty friction technology.
The HPS 5.0 compound is a revision of their previous HPS pad and offers a higher coefficient of friction than your stock brake pads, and while BMW stock pads actually have good stopping power, HPS can provide 20-40% more stopping power and higher resistance to brake fade than most standard replacement pads. Less fade means you'll have a highly durable brake pad with less brake dust than the heavy-dusting stock BMW pads.
HPS 5.0 rear brake pads should be combined with a similar brake pad on the front. Mixing front and rear brake compounds may result in undesired brake balance.
HPS 5.0 Brake Pad features:
- Increased stopping power over stock BMW pads
- High friction/torque hot or cold
- Gentle on rotors
- Extended pad life
- Low dust compared to BMW pads
- Virtually noise-free
Fitment note: these pads are for very specific models! They are only for stock F22 228i/228xi/230i/230xi, 328i/328xi/330i/330xi, and 428i/428xi/430i/430xi. If you have an M Sport car but your calipers are grey/unfinished (not blue), these are the correct rear pads.
BMW Fitments: 2 SeriesF22 / F23 (2014+) > 228i
F22 / F23 (2014+) > 228i xDrive
F22 / F23 (2014+) > 230i
F22 / F23 (2014+) > 230i xDrive
3 SeriesF30 / F31 / F34 (2012+) > 320i
F30 / F31 / F34 (2012+) > 320i xDrive
F30 / F31 / F34 (2012+) > 328d
F30 / F31 / F34 (2012+) > 328d xDrive
F30 / F31 / F34 (2012+) > 328i
F30 / F31 / F34 (2012+) > 328i xDrive
F30 / F31 / F34 (2012+) > 330i
F30 / F31 / F34 (2012+) > 330i xDrive
4 SeriesF32 / F33 / F36 (2014+) > 428i
F32 / F33 / F36 (2014+) > 428i xDrive
F32 / F33 / F36 (2014+) > 430i
F32 / F33 / F36 (2014+) > 430i xDrive