Clutch Masters Aluminum Sprung-Hub Flywheel - E82 135i, E9X 335i, F8X M3/M4, E89 Z4 35i DCT

Faster shifting, less rotating weight, delete dual mass system with an aluminum flywheel for DCT

+ -
+ -
+ -
+ -
+ -
+ -
+ -
+ -



The BimmerWorld View: upgrading for speed is the most fun but sometimes upgrading for reliability is more important. Extra power and speed comes so easily with turbo cars that it quickly becomes vitally important to upgrade other areas of the car. The DMF system does a fantastic job of providing comfort and smoothness for a modern BMW but it is still a wear item. And when subjected to increased torque under extreme conditions it can become an unnecessarily complex feature. This SMF design becomes an attractive alternative to the factory DMF when performance and reliability are the priorities.

This aluminum flywheel upgrade for the DCT transmission in E82 135i, E9X 335i, F8X M3/M4, E89 Z4 35i DCT is a notable weight savings for improved performance and reliability. For anyone modifying, tuning, or tracking their DCT it's still just as important to consider replacing the dual-mass flywheel with a single-mass design. The Clutch Masters DCT flywheel uses a spring-loaded hub that absorbs most of the vibrations and pulses from the engine. Comfort and smoothness were as much a goal for Clutch Masters engineers as performance.

While the DCT clutch is radically different than single-discs, the dual-mass flywheel (DMF) remains a constant. A worn DMF does not just impact performance or clutch operation, it's a big safety issue as well. A DMF that breaks apart can be catastrophic to the transmission as well as dangerous to the driver and passenger. The traditional solution of swapping the complex factory DMF for a simpler single-mass flywheel (SMF) and spring-loaded clutch disc does not apply to a DCT design. The DCT clutches cannot accept spring dampers and there is no center hub anyway. 

The Clutch Masters solution is to move the sprung hub of the traditional clutch to the flywheel hub. The concept is the same - absorb driveline vibrations and preserve smoothness by using heavy-duty springs but without the complexity of a dual-mass system. The flywheel can be steel or aluminum, depending on the application. Weight savings may be small to significant, depending on the original. But in all cases the dreaded DMF is eliminated and replaced with a simpler and more reliable system.

Although springs will dampen driveline vibrations, this flywheel will work best in performance, race, or track builds where performance and reliability are paramount over noise or harshness. We've had this flywheel design in our GTMore project and can say that the driveline smoothness is very good but nothing will surpass the refinement of the original DMF.

Clutch Masters DCT Flywheel features:
+ lighter weight for faster acceleration
+ lighter weight = less stress
+ faster shifts and no DCT programming change required
+ less chance of a full DCT failure
+ accepts the stock or upgraded DCT clutches
+ Made in the USA

About GTMore
We raced the F82 M4 GT4 in IMSA and SRO series for six years, achieving multiple wins and podiums. But the GT4 was a homologated model - tightly regulated by the series to balance performance with its competitors. In the interest of parity they gave the M4 generous brakes and tire sizes but reigned in the horsepower - rules limited it to five power levels with the highest being 500 crank hp. Innovation and curiosity is in our DNA so we wondered: "How much more performance is left in the GT4 platform if we removed the series restrictions? Can we build a street M4 with more speed than the GT4?" And the GTMore idea was born... Click here for the full GTMore build.

BMW Fitments:
1 Series
E82 / E88 (08-13) > 135i N54 (08-10)
E82 / E88 (08-13) > 135i N55 (11-13)
E82 / E88 (08-13) > 135is N55 (11-13)
2 Series
F87 (2016-2021) > M2 CS Racing
F87 (2016-2021) > M2 Competition S55 (2019+)
F87 (2016-2021) > M2 N55 (2016-2018)
3 Series
E90 / E91 / E92 / E93 (06-13) > 335i N54 (07-10)
E90 / E91 / E92 / E93 (06-13) > 335i N55 (11-13)
E90 / E91 / E92 / E93 (06-13) > 335is N54
3 Series
F80 (2015-2018) > M3 (2015-2018)
4 Series
F82 / F83 (2015-2020) > M4 (2015-2020)
F82 / F83 (2015-2020) > M4 GT4
F82 / F83 (2015-2020) > M4 GTS
Z Series
E89 Z4 (2009-2016) > Z4 sDrive35i
E89 Z4 (2009-2016) > Z4 sDrive35is
Recently Viewed Products