Top-End Gasket Set, Elring - E60 550i, E63 650i, E65 750i, E70 X5 4.8i

Elring Top-End Gasket Set - N62B48

+ -
+ -
+ -
+ -
+ -
+ -
+ -
+ -

  •  

Price:
$253.99

Head gasket failure is a not uncommon N62 issue and it's something to take seriously. This head gasket set for E60 550i, E63 650i, E65 750i, E70 X5 4.8i has all of the gaskets and seals associated with nearly any work done above the engine block, including head gasket replacement, intake manifold removal, valley pan, VANOS/Valvetronic and camshaft work, and more. It's good planning to have a top-end and bottom-end gasket on hand in your garage because you never know when you need a gasket in a pinch. Gasket sets are like having your very own BMW parts department at your finger tips!

The head gasket is sold separately (see below). Head gaskets are available in more than one thickness to account for a shaved or milled cylinder head. Use a stock thickness if you are not shaving the head.

Instead of buying just the head gasket (BMW part #11127530256) you can get all of the other gaskets and seals needed to complete the job. This N62 top end gasket set includes:
2 x 07119963041, connector gasket ring
1 x 11127513194, valve cover gasket and hardware, bank 1
1 x 11127513195, valve cover gasket and hardware, bank 2
2 x 07119903596, Valvetronic Actuator o-ring
2 x 11127518420, Eccentric Shaft sensor gasket (sealing)
1 x 11147506424, upper timing cover gasket
1 x 11147506425, upper timing cover gasket
2 x 11317501735, upper timing chain guide gasket
2 x 11317507432, timing tensioner gasket ring
2 x 11340029751, valve stem seals (32 total)
2 x 11367507729, non-return valve o-ring
4 x 11367513222, VANOS solenoid valve o-ring
4 x 11367546379, VANOS solenoid valve o-ring
2 x 11617514883, DISA valve o-ring
8 x 11617537999, intake manifold profile gasket
1 x 11627505788, exhaust manifold gasket
4 x 11627505789, exhaust manifold gasket
1 x 11667509080, vacuum pump o-ring
4 x 12141748398, camshaft position sensor o-ring
1 x 13547510433, throttle body profile gasket
1 x 13627515272, MAP sensor o-ring

Additional parts such as the head gasket, head bolts, other hardware, and sensors are sold separately (see below).

Symptoms of head gasket failure include: white residue (tapioca) in the valve cover, under the oil filler cap, and in drained oil, low coolant (not caused by failure in cooling system), low oil, oil leak onto exhaust manifold, and loss of power from loss of compression. Cooling system trouble on the N62 must be addressed quickly as the aluminum head is easily damaged if overheating occurs.

This is an OEM head gasket set manufactured by Elring - one of the original suppliers to BMW for these gaskets, as well as many other gaskets and seals. As the OEM it meets all of BMW's original design, fitment, and performance requirements and is TUV approved. OEM parts are the best alternative to more expensive Original BMW parts because they are virtually identical without the inflated price tag. These parts have a two year warranty.

Because this kit fits multiple models it may include duplicate or redundant parts.

BMW Fitments:

5 Series
E60 / E61 (04-10) > 550i
6 Series
E63 / E64 (04-10) > 650i
7 Series
E65 / E66 (02-08) > 750Li
E65 / E66 (02-08) > 750i
X5 Series
E70 X5 (07-13) > X5 4.8i
Recently Viewed Products