Top End Gasket Set, BMW - E39 540i, E38 740i, E53 X5 4.4i/4.6is M62TU

Head gaskets are NOT included with this kit. See below for links.

BMW puts these gasket sets together to aid in replacing the head gaskets on the M62TU engine in the 1999+ E39 540i, E38 740i, and E53 X5 4.4i/4.6is.

Instead of buying only the head gaskets, this kit includes all of the other gaskets and seals needed to do the job. It also makes a great overhaul kit for any top end work such as resolving coolant leaks or valley pan gaskets, and more. See the complete list below. Note that BMW put this kit together to fit multiple years and models and some extra parts may be included that you won't use. Additional parts such as the head gaskets, head bolts, other hardware, sensors, and hoses are sold separately. 

M62TU Head Gasket Kit includes:
1 x 11121436760, valve cover gasket, bank 1
1 x 11121436761, valve cover gasket, bank 2
2 x 11121437343, valve cover gasket, inner
16 x 11121437395, valve cover nut grommet
6 x 11121721879, valve cover bolt seal
2 x 11121706927, head non-return valve o-ring
2 x 11121733969, beauty trim/cover gasket
4 x 61311459030, beauty trim/cover bolt o-ring
2 x 11141435023, VANOS solenoid gasket
1 x 11141736758, timing cover gasket ring
1 x 11141741127, upper timing cover gasket, bank 1
1 x 11141741128, upper timing cover gasket, bank 2
1 x 07119963355, timing chain tensioner gasket ring
2 x 12141748398, camshaft sensor o-ring
2 x 11151439989, crankcase vent o-ring (not for X5)
1 x 11151747978, crankcase vent o-ring (not for X5)
1 x 11151702291, back cover profile gasket
1 x 11151736140, back coolant pipe o-ring
2 x 11349063193, valve stem seal kit
1 x 11361705578, VANOS profile gasket, bank 1
1 x 11361705579, VANOS profile gasket, bank 2
2 x 07119906361, timing chain tensioner o-ring
2 x 11531710048, large coolant tube o-ring (valley pan)
2 x 11531710055, small coolant tube o-ring (valley pan)
2 x 11531731833, coolant pipe profile gasket
2 x 07119963200, coolant pipe plug gasket ring
4 x 11611433328, intake manifold gasket
1 x 11611729727, intake manifold front gasket
1 x 11611729728, intake manifold rear gasket
1 x 13547510433, throttle body seal ring
1 x 11611745195, vent pipe o-ring
3 x 11627505789, exhaust manifold gasket
1 x 11627509677, exhaust manifold gasket
2 x 11727505259, secondary air valve gasket
2 x 07119901511, secondary air pipe o-ring
16 x 13641437476, fuel injector upper/lower o-ring

Symptoms of head gasket failure include: white residue (tapioca) in the valve cover, under the oil filler cap, and in drained oil, low coolant (not caused by failure in cooling system), low oil, oil leak onto exhaust manifold, and loss of power from loss of compression. Cooling system trouble on the M62 must be addressed quickly as the aluminum heads are easily damaged if overheating occurs.

This part is listed by BMW as BMW part number 11120004553 (11-12-0-004-553) and is described as Install Set for Head Gaskets.

This is a Genuine BMW gasket set with a two year warranty. Buying a Genuine part will usually be more expensive than an OEM or aftermarket brand but you are assured that it meets BMW's designs for fitment, performance, and longevity. It will also be the very latest design, incorporating any updates or revisions that an aftermarket brand typically will ignore.

For full BMW fitment information or for assistance from one of our BMW experts, we recommend calling us at 877-639-9648.

BMW Fitments:

5 Series
E39 (97-03) > 540i
7 Series
E38 (95-01) > 740i
E38 (95-01) > 740iL
X5 Series
E53 X5 (00-06) > X5 4.4i M62 4.4L (99-03)
E53 X5 (00-06) > X5 4.6is M62