Head & Top End Gasket Set, Elring - E46 M3, MZ3 S54, E85 Z4 M

Extensive gasket and seal package for S54 work above the engine block. OEM equivalent to BMW part #11127831920

+ -
+ -
+ -
+ -
+ -
+ -
+ -
+ -

  •  

Price:
$338.99

Head gasket failure is a not uncommon S54 issue and it's something to take seriously. This head gasket set for E46 M3, MZ3 S54, E85 Z4 M has all of the gaskets and seals associated with nearly any work done above the engine block, including head gasket replacement, intake manifold removal, VANOS and camshaft work, and more. It's good planning to have a top-end and bottom-end gasket on hand in your garage because you never know when you need a gasket in a pinch. Gasket sets are like having your very own BMW parts department at your finger tips!

Head gasket included!

Instead of buying just the head gasket (BMW part #11127835918) you can get all of the other gaskets and seals needed to complete the job. This S54 top end gasket set includes:
1 x 11127835918, head gasket
1 x 07119903546, timing chain bolt gasket ring, 8x13mm
4 x 07119963072, oil line gasket ring, 10x13.5mm
2 x 07119963129, oil line gasket ring, 12x15mm
2 x 07119963252, screw plug gasket ring, 16x20mm
1 x 07119963342, timing chain bolt gasket ring, 20x24mm
1 x 07119963418, timing tensioner gasket ring, 26x31mm
2 x 11121437395, valve cover rubber grommet seal
13 x 11127830972, valve cover rubber grommet seal
6 x 11127831271, spark plug hole profile gasket
1 x 11127832034, valve cover outer profile gasket
1 x 11127837024, oil cap gasket
1 x 11127837025, valve cover gasket seal
1 x 11141736758, gasket ring, 8.1x3.5x7.7mm
1 x 11157830966, crankcase vent valve o-ring, 34x4mm
1 x 11157832119, crankcase vent valve profile gasket
2 x 11349064457, valve stem seals (24 total)
1 x 11367831938, VANOS/front timing cover gasket (steel reinforced)
1 x 11311317318, oil pressure regulating valve o-ring, 10x2mm
1 x 11411306082, oil pressure regulating valve o-ring, 16x2mm
1 x 11531318402, thermostat o-ring, 64.77x2.62mm
3 x 11537830708, coolant pipe gasket ring
2 x 11537830709, thermostat pipe o-ring, 38x3mm
1 x 11611407695, intake boot gasket seal
1 x 11617830104, intake boot gasket seal
6 x 11627830667, exhaust manifold gasket
1 x 11727505259, secondary air pump valve gasket
2 x 12141748398, camshaft position sensor o-ring, 17x3mm
6 x 13547831483, throttle body o-ring
6 x 13641437476, fuel injector o-ring, 7.52x3.51mm
6 x 13647830611, fuel injector o-ring, 9.3x2.62mm

Additional parts such as head bolts, other hardware, and sensors are sold separately (see below).

Symptoms of head gasket failure include: white residue (tapioca) in the valve cover, under the oil filler cap, and in drained oil, low coolant (not caused by failure in cooling system), low oil, oil leak onto exhaust manifold, and loss of power from loss of compression. Cooling system trouble on the S54 must be addressed quickly as the aluminum head is easily damaged if overheating occurs.

This is an OEM head gasket set manufactured by Elring - one of the original suppliers to BMW for these gaskets, as well as many other gaskets and seals. As the OEM it meets all of BMW's original design, fitment, and performance requirements and is TUV approved. OEM parts are the best alternative to more expensive Original BMW parts because they are virtually identical without the inflated price tag. These parts have a two year warranty.

Because this kit fits multiple models it may include duplicate or redundant parts.

BMW Fitments:

3 Series
E46 (99-05) > M3
Z Series
E36/7 / E36/8 Z3 (96-02) > Z3 M - S54
Z Series
E85 / E86 Z4 (03-08) > Z4 M
Recently Viewed Products