Head Gasket Set, Elring - E36 318i, Z3 1.9 M44

OEM Head Gasket Set replaces BMW part #11129070615

+ -
+ -
+ -
+ -
+ -
+ -
+ -
+ -



Head gasket failure is a not uncommon M44 issue and it's something to take seriously. This complete head gasket set for 1996-1999 E36 318i/318is/318ti and Z3 1.9 with the M44 engine has all of the gaskets and seals typically replaced during a head gasket repair, timing cover gaskets, or intake manifold removal. Instead of buying just the head gasket (BMW part #11121433950) you can get all of the other gaskets and seals needed to complete the job.

This M44 head gasket set includes:
1 x 11121433950, head gasket (standard thickness)
2 x 07119963130, temp sensor o-ring
1 x 07119963355, timing tensioner gasket ring
1 x 11121247948, valve cover hollow bolt gasket
1 x 11121721475, spark plug gasket ring
3 x 11121721476, spark plug gasket ring
1 x 11121721876, valve cover gasket
15 x 11121721879, valve cover rubber grommet
1 x 11141247837, timing cover lower seal
1 x 11141247849, timing cover upper gasket
1 x 11141743065, timing cover gasket set
2 x 11349065438, valve stem seals (16 total)
1 x 11511739691, rear coolant pipe o-ring
1 x 11531743179, thermostat housing gasket ("axial gasket")
2 x 11611247478, intake manifold upper/lower gasket
1 x 11611734684, lower intake manifold gasket
2 x 11621435366, exhaust manifold gasket
1 x 11721435367, secondary air valve gasket
1 x 11727505259, secondary air valve gasket
1 x 12141748398, camshaft sensor o-ring
1 x 13531720251, fuel pressure regulator o-ring (large)
1 x 13531720252, fuel pressure regulator o-ring (small)
1 x 13541739809, throttle body gasket seal
4 x 13641730767, fuel injector o-ring
4 x 13641743377, fuel injector o-ring
1 x 18301711969, exhaust manifold outlet gasket

As this gasket set fits multiple models over multiple years some extra parts may be included that may not be used on your particular model. Additional parts such as head bolts, other hardware, and sensors are sold separately.

Symptoms of head gasket failure include: white residue (tapioca) in the valve cover, under the oil filler cap, and in drained oil, low coolant (not caused by failure in cooling system), low oil, oil leak onto exhaust manifold, and loss of power from loss of compression. Cooling system trouble on the M44 must be addressed quickly as the aluminum head is easily damaged if overheating occurs.

This is an OEM Head Gasket Set for M44 engines manufactured by Elring Klinger - an original supplier to BMW for many gaskets and seals. As an OEM it meets all of BMW's original design, fitment, and performance requirements and is TUV approved. OEM parts are the best alternative to more expensive Original BMW parts because they are virtually identical without the inflated price tag. This part has a two year warranty.

BMW Fitments:

3 Series
E36 (92-99) > 318i M44
E36 (92-99) > 318ic M44
E36 (92-99) > 318is M44
3 Series
E36/5 (95-99) > 318ti M44
Z Series
E36/7 / E36/8 Z3 (96-02) > Z3 1.9
Recently Viewed Products