Inspection I Oil Change Package (S85) - BMW 10W60 & OEM Mahle Filter

Genuine BMW synthetic oil with an OEM filter kit

+ -
+ -
+ -
+ -
+ -
+ -
+ -
+ -

  •  

Price:
$139.89

This Inspection I oil change package for the S85 V10 engine used in the E60 M5 and E63 M6 includes Genuine BMW 10W60 synthetic oil and an OEM Mahle oil filter. This kit includes everything you need for a standard oil change.

  • 10 liters of BMW M TwinPower 10W60 synthetic motor oil
  • 1 OEM Mahle oil filter kit
Genuine BMW 10W60 M "TwinPower Turbo" synthetic engine oil is formulated exclusively for BMW M engines from 2001-2013. This is the newest BMW 10W60 oil, now produced by Shell, and replaces the previous Castrol TWS and Edge 10W60 engine oil. The new oil is offered in the same viscosity grade but with a slightly revised formula that meets API SN specs. The new formula has a new additive package that promotes greater fuel efficiency and less emissions, especially on cold start ups. The additives reduce the oil's effectiveness at higher temps so we prefer Red Line 10W60 or Race 50WT for track use. Our recommended oil change interval is 5,000-6,000 miles with regular used oil analysis.

The Mahle oil filter kit includes the filter, two cap o-rings, and a drain plug crush seal. We insist on OEM or Original BMW filters for our customers. Mahle is an OE supplier to BMW for this and other filters found in your BMW. As an original supplier, Mahle's filter products meet or exceed the requirements from BMW. They are engineered for the correct fit and filtration needs of the S54 Motorsport six-cylinder engine.

If you proactively maintain your car, and take interest in its care and performance, there are several other things to check during a routine oil change (aka Inspection I service):
  • top off and inspect other fluids: power steering, other hydraulic fluids, coolant, brake fluid (replace annually)
  • clean or replace engine air filter (replace annually)
  • clean or replace cabin air filter (replace annually)
  • set all tire pressures, including your spare (if equipped)
  • inspect brake pads and rotors
  • inspect serpentine belts for cracking
  • inspect all hoses, including power steering, for leaks or poor fitment
  • inspect intake boots for cracks or leaks
  • Take this opportunity to inspect the general condition of the engine bay and chassis. Staying ahead of problems, even minor ones, will help avoid major issues in the future. As well as help you get the most enjoyment from BMW ownership.


    BMW Fitments:

    5 Series
    E60 (06-10) > M5
    6 Series
    E63 / E64 (06-10) > M6
    Recently Viewed Products