Inspection I Oil Change Package (B46/B48) - Red Line 0W20 & OEM Mahle Filter

Premium synthetic oil with an OEM filter kit

+ -
+ -
+ -
+ -
+ -
+ -
+ -
+ -

  •  

Price:
$104.99

This Inspection I oil change package for the 2016+ turbo B46/B48 four-cylinder gasoline cars includes Red Line 0W20 synthetic oil and an OEM Mahle oil filter. The 0W20 is the same weight that BMW recommends. This kit includes everything you need for an oil change on the turbo models of the F22 230i, F30 330i, F32 430i, G30 530i, X3/X4 30i, and Z4 30i models.

  • 6 quarts of Red Line 0W20 synthetic motor oil (the capacity should be close to 5.5 quarts)
  • 1 OEM Mahle oil filter kit
Red Line oil outperforms the factory oil when it comes to strength under stress. Factory-type oils are engineered for efficiency and include additives to enhance lubrication, reduce emissions, and improve fuel economy. But in the high performance turbo world we live in, these oils break down faster, leaving your engine unprotected. Red Line oil has higher levels of ZDDP (zinc and phosphorous) that do a better job of lubricating, protecting, and sealing in the hotter environments our turbo engines are capable of making while still exceeding BMW LL-01 standards. Red Line oil includes the appropriate levels of anti-wear additives and low ash content to ensure compatibility with factory emissions equipment. While we prefer to use a heavier weight such as 5W30 or 10W40, this 0W20 is the recommended viscosity for the B46/B48 engines.

The Mahle oil filter kit includes the filter, cap o-rings, and a drain plug crush seal. We insist on OEM or Original BMW filters for our customers. Mahle is an OE supplier to BMW for this and many other filters and components found in your BMW. As an original supplier, Mahle's filter products meet or exceed the requirements from BMW. They are engineered for the correct fit and filtration needs of the B46 and B48 turbo 4-cylinder engines.

If you proactively maintain your car, and take interest in its care and performance, there are several other things to check during a routine oil change (aka Inspection I service):
  • top off and inspect other fluids: power steering, other hydraulic fluids, coolant, brake fluid (replace annually)
  • empty oil catch can (if added)
  • clean or replace engine air filter (replace annually)
  • clean or replace cabin air filter (replace annually)
  • set all tire pressures, including your spare (if equipped)
  • inspect brake pads and rotors
  • inspect serpentine belts for cracking
  • inspect all hoses, including power steering, for leaks or poor fitment
  • inspect intake boots for cracks or leaks
  • Take this opportunity to inspect the general condition of the engine bay and chassis. Staying ahead of problems, even minor ones, will help avoid major issues in the future. As well as help you get the most enjoyment from BMW ownership.


    BMW Fitments:

    2 Series
    F22 / F23 (2016+) > 230i
    F22 / F23 (2016+) > 230i xDrive
    3 Series
    F30 / F31 / F34 (2016+) > 330i
    F30 / F31 / F34 (2016+) > 330i xDrive
    4 Series
    F32 / F33 / F36 (2016+) > 430i
    F32 / F33 / F36 (2016+) > 430i xDrive
    5 Series
    G30 (2017+) > 530i
    G30 (2017+) > 530i xDrive
    X Series
    G01 X3 (2018+) > X3 xDrive30i
    X Series
    G02 X4 (2018+) > X4 xDrive30i
    Z Series
    G29 Z4 (2019+) > Z4 sDrive30i
    Recently Viewed Products