CP-Carillo PRO-H Connecting Rod Set with WMC Bolts - N20/N26 Engines

Lightweight and high-strength upgrade for the piston connecting rods on N20 and N26 engines.

+ -
+ -
+ -
+ -
+ -
+ -
+ -
+ -

  •  

Price:
$1,230.60

This set of 4 CP-Carillo PRO-H piston connecting rods includes WMC connecting rod bolts, and fits the N20/N26 turbocharged 4-cylinder engine.

Specifications: 
Length (Center to Center): 144.35mm
Pin Width: 20.88mm
Big Width: 20.88mm
Big Bore: 53.62mm
Pin Bore: 22.00mm

Fitment Notes: 
  • Not for use with original BMW pistons
  • Requires slight modification to the bottom of one side of each cylinder sleeve. This resolves a slight clearance issue caused by the offset crankshaft.
About CP Connecting Rods: Each CP connecting rod is cut from a forging of Carrilloy, a proprietary steel alloy made with chrome, nickel, moly, and vanadium. CP rods are also heat treated and shot peened to increase strength and durability. Made in USA.

About WMC Rod Bolts: H11 tool steel bolts withstand approximately 15-18 torque cycles. This low carbon steel is commonly used on highly stressed structural parts within the aerospace industry.

For full BMW fitment information or for assistance from one of our BMW experts, we recommend calling us at 877-639-9648.

BMW Fitments:

2 Series
F22 / F23 (2014+) > 228i
F22 / F23 (2014+) > 228i xDrive
3 Series
F30 / F31 / F34 (2012-2019) > 320i
F30 / F31 / F34 (2012-2019) > 320i xDrive
F30 / F31 / F34 (2012-2019) > 328i
F30 / F31 / F34 (2012-2019) > 328i xDrive
4 Series
F32 / F33 / F36 (14-20) > 428i
F32 / F33 / F36 (14-20) > 428i xDrive
5 Series
F10 / F11 (11-16) > 528i N20 (2012-2016)
F10 / F11 (11-16) > 528i xDrive N20 (2012-2016)
X1 Series
E84 X1 (2013-2015) > X1 28i
E84 X1 (2013-2015) > X1 28i xDrive
X3 Series
F25 X3 (2011-2017) > X3 sDrive28i
F25 X3 (2011-2017) > X3 xDrive28i
X4 Series
F26 X4 (2015-2018) > X4 28i xDrive
Z Series
E89 Z4 (2009-2016) > Z4 sDrive28i
Recently Viewed Products