Evolution Racewerks chargepipe with brushed aluminum and no meth bungs/ports.
Owners of 2007-2009 N54 E82 135i and E90/E92 335i BMW models will find out that the plastic intake chargepipe going to the throttle body is a weak point that will eventually fail, even on fully stock, unmodified cars. The chargepipe can fail in several locations: the connection to the throttle body, the necks of the boost diverter valves, and along the plastic tube of the chargepipe itself. Any failure at these points will result in loss of boost and performance and may put the car into a limp mode.
This aluminum chargepipe is the fix for all of those issues and comes with a lifetime warranty so you will never have to buy another chargepipe again. Evolution Racewerks are experts in the turbo tuning industry and they have designed this pipe to be a direct replacement for the factory piece and as a performance upgrade as well. Three finishes are offered: mirror polished, brushed aluminum silver, and black hardcoat anodize.This pipe is set up to use an aftermarket Blow-Off Valve instead of the factory Diverter Valves (which are prone to failure also). A BOV is available separately or you can source your own (HKS or TiAL only).Key Features:
- Direct replacement for factory chargepipe between intercooler and throttle body
- Increase throttle response and decreases turbo lag.
- CNC machined fittings and flanges
- Use with aftermarket BOV.
- Lightweight High Grade 6061 Aluminum Piping.
- Retains factory-style o-ring for a leak-free seal to throttle
- Includes all hardware for complete installation.
- Limited Lifetime Warranty.
The ER N54 Chargepipe installs easily thanks to factory-type connectors and precise CNC machining. Other charge pipes use silicone hoses and hose clamps which are common in the industry but do not seal tight enough on the BMW N54 engine. The original retaining clip can be re-used from the throttle-body connection but we recommend a new one.
An aftermarket BOV is a more reliable solution than the factory style diverter valves. The factory plastic diverter valves (DV) will get weak and will not be able to hold boost on the N54, leading to boost leaks or other failures. Aftermarket DV are available that do a better job of holding boost but a true BOV may be the best solution. Select your BOV style from the product options. The BOV is sold separately. You can find HKS and TiAL blow-off valves from the links below or source your own.
This chargepipe is for 2007-4/2009 135i, 335i, 335xi models. The factory pipe is 2-piece and this will replace the upper portion, past the rubber accordion connector. Later 2009+ models use a larger single-piece pipe that can also be used on the 2007-2009 models. (Note that this short version is being phased out, so in the future only the longer/late style will be available - But the longer style works on all N54, including these early 2007, 2009, and 2009 models.)Notice of Emissions Non-Compliance.
This product is intended only for racing vehicles that may never be used, or registered or licensed for use, upon a public highway. Removing, disabling, or altering emissions equipment on a pollution-controlled road vehicle is illegal. Installing devices or software that trick, disable, or modify emissions controls and monitors on a pollution-controlled road vehicle is also illegal. This product is sold only for racing, competition, track, hobby, or other off-road use. It's use is prohibited in any motor vehicle that is subject to emissions inspection or control. It is not legal for installation or use on any pollution controlled motor vehicle in any state, province, or jurisdiction governed by, or which has adopted, CARB or EPA regulations. BimmerWorld may confirm a customer's racing license, entry, track participation, and we may ask for photos or proof of a permanent race car build. We reserve the right to cancel part(s) that are not for legitimate racing or track purposes. Some suppliers have shipping exceptions to certain states or territories, requiring extra delivery time. We will advise you of any delays.
BMW Fitments:1 Series
E82 / E88 (07-09) > 135i3 Series
E90 / E92 / E93 (07-09) > 335i
E90 / E92 / E93 (07-09) > 335xi