Oil Pan Baffle - N54 135i/335i

Weld-in oil pan baffle helps to protect against engine oil starvation.

+ -
+ -
+ -
+ -
+ -
+ -
+ -
+ -

  •  

Price:
$189.95

When driving your E82 135i, 1M or E90/E92 335i on the track you must pay attention to oil pressure. During prolonged hard cornering, oil shifts away from the oil pump pickup and leaves the pump sucking fumes - not good at all for the health of your engine! By the time the dash warning light comes on the damage has already been done. You can help prevent oil starvation by installing this baffle into the oil pan. It does a better job of keeping a plentiful supply of oil near the pump pickup. It's easy to install, once the oil pan is removed, and is cheap insurance against engine failure. While oil starvation is not as common as it once was, we ran similar baffled oil pans on our E90 race cars because of oil starvation on the N52 engines.

Installation Notes:
  • Welding required for proper installation
  • A new oil pan gasket is required (see below).
  • For RWD N54 cars only.


BMW Fitments:

E82 / E88 (08-13) > 135i
E82 / E88 (08-13) > 1M (11-12)
3 Series
E90 / E91 / E92 / E93 (06-13) > 335i
E90 / E91 / E92 / E93 (06-13) > 335is
Z Series
E89 Z4 (2009-2016) > Z4 sDrive35i
E89 Z4 (2009-2016) > Z4 sDrive35is
Recently Viewed Products