Schrick 282-deg Camshaft - E28 533i/535i, E24 633CSi/635CSi, E23 733i/735i (M30 Motronic 1)

Sport cam for mid-high RPM power gains and minimal loss of torque

+ -
+ -
+ -
+ -
+ -
+ -
+ -
+ -

  •  

Price:
$516.99

Schrick performance camshaft upgrade for early 1976-1983 Motronic fuel-injected M30 models - E28 533i/535i, E24 633CSi/635CSi, and E23 733i/735i.

Schrick M30 282° performance camshaft is a mild sport cam used for street use where a little more mid-range and top end is wanted or in cases where a stock factory cam has worn out. The 282 will not drastically change the power band, idle quality, or driving characteristics and does not require any additional parts or hardware (new valve springs are always a good idea, Schrick valve spring part #000202090). This 282 with less lift replaces a previous 284° higher lift. The 284 is no longer available.

Camshaft tuning is all about optimizing air/fuel flow for your specific needs. Higher camshaft degrees indicate quicker valve opening while the cam lobe profile opens the valve more and for longer. This cam goes nicely with fresh fuel injectors, larger valves, or a ported and polished cylinder head.

The Schrick 282 degree cam provides 8.4mm of valve lift on the intake and exhaust and holds the valve open longer. Valve clearance should be 0.25mm on intake and exhaust.

Notice of Emissions Non-Compliance. This product is intended only for vehicles that may never be used, or registered or licensed for use, upon a public highway. This cam is designed to be used with all original, factory-installed equipment, including emissions controls. Removing, disabling, or altering emissions equipment on a pollution-controlled road vehicle is illegal. Installing devices or software that trick, disable, or modify emissions controls and monitors on a pollution-controlled road vehicle is also illegal. This product is sold only for racing, competition, track, hobby, or other off-road use. It is not legal for installation or use in California on any pollution controlled motor vehicle. It is not legal for installation or use on any pollution controlled motor vehicle in any state, province, or jurisdiction governed by, or which has adopted, CARB or EPA regulations.

BMW Fitments:

5 Series
E28 (82-88) > 533i
E28 (82-88) > 535i
6 Series
E24 (77-89) > 633CSi
E24 (77-89) > 635CSi
7 Series
E23 (77-87) > 733i
E23 (77-87) > 735i
Recently Viewed Products