Schrick 292-deg Camshaft - E30 M3 (S14 )

Schrick 292° performance camshaft for the S14 engine used in the E30 M3. This would be used on the intake side to give more valve lift and duration but not as a full-race build.

Camshaft tuning is all about optimizing air/fuel flow for your specific needs. The higher degree will open the valves sooner, deeper into the combustion chamber, and for longer time. Choosing the correct camshaft depends on the rest of your engine specs and goals. More aggressive cams should be paired with appropriate air and fuel upgrades to make full use of their operating specs.

Schrick does not require any additional hardware with this cam but they do recommend new valve springs, seats, and retainers. Contact us for a package price. If using the common BMW Motorsport/Evo 3 valve springs, they may need to be shimmed underneath to reach the appropriate travel with this cam.

All Schrick camshafts are made in Germany using wear-resistant chilled cast iron and machined with advanced CNC equipment. They have a one year warranty.

S14 292 cam specs:
Lobe Duration: 292°
Valve Lift: 12.0mm
Valve Lift @ TDC: 4.55mm
Valve Timing (IO-IC-EO-EC): 44-68 68-44
Intake Valve Clearance: 0.25mm (0.0098")
Exhaust Valve Clearance: 0.30mm (0.012")

Manufacturer's Notes:
1. While new springs may not be required, you must ensure the new valve lift does not fully compress the spring. It may be necessary to shim the spring's installed height.
2. Valve timing and valve opening durations are shown minus the ramps.
3. Valve timing is shown in °Crankshaft in relation to TDC.
4. All valve lift figures are shown without deduction of valve lash, i.e. the actual valve lift is the stated valve lift minus the valve lash. Hydraulic lifters have no lash so the valve lift is the actual valve lift.

Notice of Emissions Non-Compliance. This product is intended only for racing vehicles that may never be used, or registered or licensed for use, upon a public highway. Removing, disabling, or altering emissions equipment on a pollution-controlled road vehicle is illegal. Installing devices or software that trick, disable, or modify emissions controls and monitors on a pollution-controlled road vehicle is also illegal. This product is sold only for racing, competition, track, hobby, or other off-road use. It's use is prohibited in any motor vehicle that is subject to emissions inspection or control. It is not legal for installation or use on any pollution controlled motor vehicle in any state, province, or jurisdiction governed by, or which has adopted, CARB or EPA regulations. BimmerWorld may confirm a customer's racing license, entry, track participation, and we may ask for photos or proof of a permanent race car build. We reserve the right to cancel part(s) that are not for legitimate racing or track purposes.

BMW Fitments:

3 Series
E30 (84-91) > M3