Schrick 292 Camshaft Set - E9X M3 (S65)

Higher lift Schrick camshafts for street or race performance

+ -
+ -
+ -
+ -
+ -
+ -
+ -
+ -



This Schrick E90/E92 M3 cam set is a must-do for internal engine performance. Schrick has been producing valvetrain components for BMW engines for decades and knows a thing or two about optimal head flow and performance. This cam set gives big power increases above 5000 RPM while only giving up minimal torque. These make a great street or race cam set retaining the engine's smooth idle and no changes to VANOS. Custom dyno tuning is very strongly recommended.

New Schrick valve springs and retainers are required with these cams. The new springs are the correct size and stiffness to allow the stock valves to open without valve-piston contact. This package is sold separately - click here for link.

S65 cam specs:
Cam lift: 12.2mm
Intake Duration: 292°
Intake Peak Timing: 132-74°
Intake Valve Timing (IO-IC): 14-98, 72-40
Intake Valve Lift, TDC: 0.4-7.37mm
Exhaust Duration: 292°
Exhaust Peak Timing: 134-86°
Exhaust Valve Timing (EO-EC): 100-12, 52-60
Exhaust Valve Lift, TDC: 0.35-5.75mm
Valve Clearance: n/a (hydraulic lifter)
Additional notes: check valve to piston clearance; clearance at max lift = min. 1.00mm.

Professional installation is required.

Made in Germany

Notice of Emissions Non-Compliance. This product is intended only for racing vehicles that may never be used, or registered or licensed for use, upon a public highway. Removing, disabling, or altering emissions equipment on a pollution-controlled road vehicle is illegal. Installing devices or software that trick, disable, or modify emissions controls and monitors on a pollution-controlled road vehicle is also illegal. This product is sold only for racing, competition, track, hobby, or other off-road use. It's use is prohibited in any motor vehicle that is subject to emissions inspection or control. It is not legal for installation or use on any pollution controlled motor vehicle in any state, province, or jurisdiction governed by, or which has adopted, CARB or EPA regulations. BimmerWorld may confirm a customer's racing license, entry, track participation, and we may ask for photos or proof of a permanent race car build. We reserve the right to cancel part(s) that are not for legitimate racing or track purposes.

BMW Fitments:

3 Series
E90 / E92 / E93 (08-13) > M3
Recently Viewed Products