Head & Top End Gasket Set, Elring - E9X M3 (S65)

Extensive gasket and seal package for S65 work above the engine block. OEM equivalent to BMW part #11120429838.

+ -
+ -
+ -
+ -
+ -
+ -
+ -
+ -

  •  

Price:
$316.58

This head gasket set for E90 M3 and E92/E93 M3 has all of the gaskets and seals associated with nearly any work done above the engine block, including head gasket replacement, intake or exhaust removal, throttle bodies, VANOS and camshaft work, and more. It's good planning to have a top-end and bottom-end gasket on hand in your garage because you never know when you need a gasket in a pinch. Gasket sets are like having your very own BMW parts department at your finger tips!

Head gaskets and valve cover gaskets are sold separately (see below). Head gaskets are available in more than one thickness to account for a shaved or milled cylinder head. Use a stock thickness if you are not shaving the head.

Instead of buying just the head gasket (BMW part #11127841560) you can get all of the other gaskets and seals needed to complete the job. This S65 top end gasket set includes:

2 x 11127838162, front cover profile gasket
2 x 11157838369, oil separator gasket
2 x 11157838370, oil separator o-ring
2 x 11317507432, timing chain tensioner gasket ring
2 x 11340032548, valve stem seals
4 x 11367507729, oil return valve o-ring
2 x 11367548459, VANOS solenoid o-rings
4 x 11367838468, VANOS solenoid o-ring
4 x 11531406249, thermostat connector o-ring
2 x 11537835651, heater pipe gasket (back of heads)
2 x 11537838211, thermostat connector gasket
4 x 11627841114, exhaust manifold gasket (cyl 1, 6, 7, 8)
4 x 11627841115, exhaust manifold gasket (cyl 2, 3, 4, 5)
2 x 11727838389, air pump valve gasket
8 x 13547838297, throttle body gasket
4 x 13627796699, camshaft sensor o-ring
8 x 13641437476, fuel injector top o-ring
8 x 13647675557, fuel injector bottom o-ring

Additional parts such as the head gaskets, valve cover gaskets, head bolts, other hardware, and sensors are sold separately (see below).

Symptoms of head gasket failure include: white residue (tapioca) in the valve cover, under the oil filler cap, and in drained oil, low coolant (not caused by failure in cooling system), low oil, oil leak onto exhaust manifold, and loss of power from loss of compression. Cooling system trouble on the S65 must be addressed quickly as the aluminum head is easily damaged if overheating occurs.

This is an OEM head gasket set manufactured by Elring - one of the original suppliers to BMW for these gaskets, as well as many other gaskets and seals. As the OEM it meets all of BMW's original design, fitment, and performance requirements and is TUV approved. OEM parts are the best alternative to more expensive Original BMW parts because they are virtually identical without the inflated price tag. These parts have a two year warranty.

BMW Fitments:
3 Series
E90 / E91 / E92 / E93 (06-13) > M3
Recently Viewed Products