Head Gasket Set, Elring - E36 M3 95

Head gasket failure is a not uncommon S50 issue and it's something to take seriously. This complete head gasket set for 1995 E36 M3 with the S50 engine has all of the gaskets and seals typically replaced during a head gasket repair. Instead of buying just the head gasket (BMW part #11121405106) you can get all of the other gaskets and seals needed to complete the job. This set includes -

3 x 07119963130, oil drain plug seal ring
1 x 07119963200, coolant drain gasket ring
2 x 07119963201, exhaust manifold plug gasket ring
1 x 07119963418, timing chain tensioner seal ring
1 x 11120034107, valve cover and spark plug hole gasket set
1 x 11121405106, cylinder head gasket
1 x 11121738963, rear coolant tube gasket
1 x 11151730724, crankcase vent hose o-ring
2 x 11349064457, valve stem seal kit (24 seals total)
1 x 11361740840, VANOS unit profile gasket
1 x 11531265084, thermostat o-ring
1 x 11531740437, thermostat housing profile gasket
1 x 11611716174, throttle body seal
6 x 11621717259, intake manifold profile gaskets
1 x 11611730725, o-ring
1 x 11611735735, temp sensor gasket ring
1 x 11611735736, temp sensor washer gasket
1 x 11611735859, o-ring
3 x 11621728984, exhaust manifold to head gasket
1 x 12141748398, camshaft position sensor o-ring
1 x 13531720251, fuel pressure regulator o-ring
1 x 13531720252, fuel pressure regulator o-ring
1 x 13541735380, intake thermostat sensor o-ring
12 x 13641730767, fuel injector o-ring
2 x 18301716888, exhaust manifold to cat gasket
2 x 32411093596, VANOS oil line seal ring

Additional parts such as head bolts, other hardware, and sensors are sold separately (see below).

Symptoms of head gasket failure include: white residue (tapioca) in the valve cover, under the oil filler cap, and in drained oil, low coolant (not caused by failure in cooling system), low oil, oil leak onto exhaust manifold, and loss of power from loss of compression. Cooling system trouble on the S50 must be addressed quickly as the aluminum head is easily damaged if overheating occurs.

This is an OEM Head Gasket Set for S50US engines manufactured by Elring Klinger - an original supplier to BMW for many gaskets and seals. As an OEM it meets all of BMW's original design, fitment, and performance requirements and is TUV approved. OEM parts are the best alternative to more expensive Original BMW parts because they are virtually identical without the inflated price tag. This part has a two year warranty.