Distributor Cap (Updated), Bremi - E30 M3 S14

OEM distributor cap to ensure proper spark and timing. Replaces BMW part #12111312160. Updated design with solid contact pin.

+ -
+ -
+ -
+ -
+ -
+ -
+ -
+ -

  •  

Price:
$91.99

This part is listed by BMW as BMW part number 12111312160 (12 11 1 312 160), and is described as the updated Distributor Cap for E30 M3 and the S14 engine. This is the later-style cap with a solid (non spring) center contact pin. Use with the updated ignition rotor (BMW part #12111312157).

Ideally you would replace cap and rotor together and buy two compatible parts. However, sometimes it's necessary to replace one without the other. NOTE: The E30 M3 had two styles of distributor cap & rotor combinations. The early style has a spring-loaded center contact pin and the rotor is a flat contact pad on top. The updated style uses a solid contact pin with a recessed "pad" / hole on the top of the rotor. We also sell an older style due to the lower expense, but for dedicated track cars that see constant high-RPM use, we recommend the updated version. These parts must be used in correct pairs, please check your existing part numbers if you are not ordering both parts.

The updated style uses Bosch part number 1235522422 (printed on the black plastic cover). Bremi brand caps will have 6022R printed on the cover.
The older style uses Bosch part number 1235522406 (printed on the black plastic cover).

This is an OEM E30 cap manufactured by Bremi - an original supplier to BMW for this part, as well as many other ignition components. As the OEM it meets all of BMW's original design, fitment, and performance requirements and is TUV approved. OEM parts are the best alternative to more expensive Original BMW parts because they are virtually identical without the inflated price tag. This part has a two year warranty.

BMW Fitments:
3 Series
E30 (84-91) > M3
Recently Viewed Products