N54 Turbocharger Overhaul Kit, BMW - E9X 335i
A complete front & rear N54 turbo install kit with OE Mitsubishi Turbos and all OEM install parts
Do your N54 turbo overhaul job right! This very comprehensive kit for the 2007-2010 335i and 335xi includes two brand new OE N54 Turbos (made by Mitsubishi, the original supplier to BMW) as well as all of the commonly replaced gaskets and hardware for replacing turbos on any 2007, 2008, 2009, or 2010 model 335i or 335xi.
This full package is specifically for the E90 335i & 335xi sedan, E92 335i & 335xi coupe, and E93 335i convertible models with the N54 twin turbo engine. It also fits the 335is model, which used the N54 engine in 2011, 2012 and 2013. Please note, this is only for Left Hand Drive (LHD) model 335i & 335xi. This kit is for Left Hand Drive (LHD) models only. (RHD models use a different rear turbo than LHD, so please check with us first.)
Our included hardware kit uses a mix of Genuine BMW and OEM parts - nothing aftermarket, suspect, or from a brand we wouldn't use on our own BimmerWorld employee or project BMWs. These brands include Genuine BMW, Elring, and Victor Reinz, all of which have a two year warranty.
E9X 335 Turbo Overhaul Package Includes:
1 x 11657649289, N54 front Turbo
1 x 11657649290, N54 rear Turbo (specific to E90/E92/E93 335i & 335xi)
2 x 18307553601, turbo to downpipe gasket ring
2 x 11657620508, turbo to downpipe flange t-bolt clamp
2 x 18307553603, downpipe to center exhaust gasket
4 x 11627509731, downpipe to center exhaust copper nut
3 x 11517602123, water pump mounting bolt
1 x 11537545302, water pipe to engine block gasket
2 x 11427563453, oil return lines to engine block o-ring
2 x 11422246091, oil return line to turbo housing profile gasket
8 x 11427558936, coolant line connection o-ring
2 x 13717568030, hotside chargepipe to turbo flange o-ring
1 x 11617791470, hotside chargepipe to intercooler o-ring
2 x 11657558922, hotside chargepipe to intercooler t-bolt clamp
1 x 13717568029, rear turbo inlet gasket ring
1 x 13712247398, front turbo inlet gasket ring
16 x 18407502196, copper flange nut
6 x 11627558906, turbo manifold gasket
16 x 11127593376, manifold stud
4 x 11427558936, oil supply line o-ring
1 x 11657803732, meter of vacuum line
When replacing the N54 turbos on the 335i and 335xi, there are many parts that must be replaced and some that are simply a good idea to replace. This kit covers both and sits in between a minimalist kit for the ace DIYer and the ultra kit for the DIY or shop that wants a completely fresh install. It should be noted that while replacing turbos can be done with the car on jack stands, "the easiest" procedure (especially on 335xi) is to drop the subframe, suspension, engine, and transmission from below (a lift is essential here). This allows infinite access to the parts. Depending on which procedure you choose, additional parts may be required. See below for links or contact us for advice.
Note for 335xi models: More parts must be removed to access the turbos on Xi AWD models. This may include the axle shaft, subframe, right side engine mount, and steering rack. How much you remove is dependent on your (or your mechanics) abilities and tool chest. All of the parts in this kit are common to the Xi models, however, there may be other parts needed depending on how much more is removed for access. Contact us via phone or email for a group of parts we have available to assist you.
Both Turbo are brand new, made by Mitsubishi, the original supplier for BMW. You can be assured you are getting the best quality OE / Stock turbos, with absolutely NO CORE CHARGE or core return hassle. You're also assured you're getting the latest design improvements available. All of the included hardware this kit is either Genuine BMW or OEM. We assembled this kit to make it easy for you (or your mechanic) to get the right parts easily, and at the best price. All parts include a two year warranty.
Are you reusing your original oil supply/return lines?
In some cases, the turbocharger oil lines can be reused. Careful inspection is highly recommended. Aging oil lines are a common source of leaks. The oil supply and return lines can also become kinked during the turbocharger removal process. If you suspect that your lines have been bent or damaged, it is wise to replace them preventively. Another reason to replace the N54 oil lines is that the lines can become plugged and restricted by burnt oil residue, causing the turbochargers to overheat and fail. If you're replacing your turbos, we recommend replacing the oil supply/return lines while you're in there. See below for BimmerWorld Recommended Related Items.
For full BMW fitment information or for assistance from one of our BMW experts, we recommend calling us at 877-639-9648.
E90 / E92 / E93 (07-10) > 335i
E90 / E92 / E93 (07-10) > 335xi
E92 / E93 (11-13) > 335is