Pre/Post-Cat Oxygen Sensor, Bosch - E36, E39, Z3 - 11781427884

OEM Bosch pre-cat or post-cat O2 sensor

+ -
+ -
+ -
+ -
+ -
+ -
+ -
+ -

  •  

Price:
$119.99

E36 323i/328i, E36 M3 3.2, E39 528i, Z3 2.8, MZ3 S52 O2 sensor for either before or after the catalytic converter.

The O2 sensors, also known as Lambda probes, on the E36, E39, and Z3 are some of the most important sensors on the M52/S52 engine. As a pre-cat sensor, they tell the engine computer how well the engine is working (note: not how clean it is, that's the post-cat sensor). The pre-cat sensors give the ECU feedback on the engine tuning - if it's running lean or rich - and the ECU makes adjustments based on their data. Each bank of cylinders has its own sensor before and after the catalytic converters (this sensor is the same for both banks). The ECU adjusts fuel injection based on the data so the sensors also affect fuel economy in addition to performance. An integrated heater circuit helps prolong the life of the sensor but can also fail and give a check engine light.

As a post-cat sensor, it reads and checks the status of the exhaust after going through the catalytic converter. The engine computer uses this data to verify the cats are working properly. A failed O2 sensor can set several different types of fault codes so it's a good place to start if you have O2 sensor or heater circuit faults. Most cat manufacturers will insist that you have new post-cat O2 sensors when you install new cats.

Signs of an O2 sensor failure include worse fuel economy, lack of torque, and fault codes for the sensor(s). It is a good idea to replace the O2 sensors at regular intervals rather than waiting for a failure. Since their performance degrades over time you may not even notice the loss in performance or economy. Since the complete O2 sensor is part of the emissions system, a bad sensor may not set multiple OBD Readiness flags.

This is a genuine Bosch E36, E39, Z3 O2 sensor. Bosch is the original supplier to BMW for some oxygen sensors, as well as the inventors of the system. This part number replaces several  BMW oxygen sensor part numbers (some older and obsolete), including 11781437943 (11781437943), 11781427884 (11 78 1 427 884), 11 78 1 748 762 (11781748762), and 13884. 

BMW Fitments:

3 Series
E36 (92-99) > 328i
E36 (92-99) > 328ic
E36 (92-99) > 328is
E36 (92-99) > M3 (96-99)
5 Series
E39 (97-03) > 528i
Z Series
E36/7 / E36/8 Z3 (96-02) > Z3 2.8
E36/7 / E36/8 Z3 (96-02) > Z3 M - S52
Recently Viewed Products