The Schroth Clubman 3x2 6-Point Harness is an entry-level harness system designed specifically for budget-minded racers using a HANS or FHR (Frontal Head Restraint) device. But because it's made by Schroth, you're guaranteed top notch safety despite the wallet-friendly price.
The Clubman is one of the least expensive harness systems available that still incorporates SFI 16.1 and FIA approval ratings. There's no shortage of effectiveness with the Clubman harness, but it uses less efficient adjusters and only comes in one configuration as a way to keep cost to a minimum. This harness is also a bit heavier than the Schroth Profi and Flexi harnesses, but it gets the job done so you can get out there and race with the piece of mind that you're protected in a Schroth harness.
The Clubman 3x2 features a 2" lap belt, T-bar sub strap, and 3" shoulder belts. The 3" shoulder belts are not recommended for use with HANS (only 2" should be used) but this harness makes for an excellent choice for drivers or passengers that do not use a HANS device but insist on maximum protection. All belts have permanently sewn snap-in ends.
The 2" lap belt is used for increased safety, as it rides within the crest of your pelvis where a 3" belt would rest on the edges. The beneficial placement of the lap belt means that you can make the belt up to an inch and a half tighter. This ensures that it will be doing its job earlier in an accident event because of the quicker loading.
The shoulder belt uses a pull-down configuration, while the lap belts are pull-up.
The Clubman 3x2 series meet the very latest FIA standards for competition harnesses. FIA testing now includes a 70G frontal hit and a 30 degree offset hit. Certification is for 5 years from date of manufacture.
Available only in Black.
Made in Germany.
Looking for more info, tips, or buying advice on race or street harnesses? Click over to our Safety Harness Guide in our Tech section.