KW Variant 4 (V4) Coil Over Kit - F10 M5, F06 M6 with EDC

Triple-adjustable dampers plus height adjustment for high-performance street or track driving. Includes EDC-delete kit.

+ -
+ -
+ -
+ -
+ -
+ -
+ -
+ -



F10 M5 KW V4 Coil Overs:
Front Lowering Range: 15-45mm
Rear Lowering Range: 10-40mm

A more powerful toolbox for mixed performance street and intermediate-level track driving.

The KW V4 takes adjustable street dampers to a new level - high and low speed compression is adjustable along with rebound damping and ride height. The dampers come with a recommended setting determined by the KW engineers for your particular vehicle, fine-tuned on KW's 7-post dynamic rig and the Nürburgring Nordschleife. With more adjustments you can adjust handling for each part of the corner - braking, initial turn-in, mid-corner entry, mid-corner exit, and corner exit/power down.

  • 6 clicks Low Speed Compression controls large body motions, especially in the middle of a corner
  • 15 clicks High Speed Compression controls faster wheel motions like bumps as well as braking and transitions
  • 16 clicks Rebound adjustment to tune the ride comfort
KW has a strong reputation for delivering long-term reliability and performance due to their use of corrosion-resistant materials such as aluminum, stainless steel (“inox-line”), and composites. The dirt-resistant trapezoid thread and composite collar mean that you’ll always be able to quickly and easily adjust your ride height when needed, regardless of how many years or seasons they’ve been installed. Adjusting ride height is a simple task, with one-piece composite height adjusters on the front dampers and height adjusters sitting either above or below the rear springs.

Fitment Notes: KW Variant coil overs come with monoball top mounts for the front and rear shocks. These are solid mounts with no rubber isolator and additional vibration and harshness should be expected. Monoball mounts typically require more frequent maintenance and replacement. Depending on ride height setting and wheel/tire sizes wheel spacers may be required on the front wheels.

Note: EDC electronic shocks will be disabled with the included KW EDC-delete module.

M6 in GranCoupe body style only.

BMW Fitments:

5 Series
F10 / F11 (11-16) > M5 (2013-2016)
6 Series
F12 / F13 (12-18) > M6
Recently Viewed Products