+ Quickly and easily adjust camber AND caster + Large range of camber adjustment - 1.9 degrees sweep (32mm negative, 15mm positive), -10mm caster + OEM, Sport, 2.25", 60mm, 2.5" spring options + All hardware, spring seats, and accessories included + Allen hex wrench and mounting bracket included (optimal length for easy access) + NO increase in ride height - same stack height as OE mount
The Ground Control camber & caster plates for xDrive G80 / G82 / G83 and G20 / G22 / G42 allow independent adjustment of camber and caster from the top of the front strut towers. This is an innovative design that allows adjustment of either one without the need for any disassembly. The included wrench will loosen the hardware for each and tucks neatly into its holder - traditional Allen sockets and extensions are not needed (and won't fit).
Ground Control camber plates are the very leading edge of camber plate design, features, and innovation. The main strut shaft is supported by a ¾" monoball bearing. A separate Torrington needle bearing plate supports the weight of the car, locates the spring, and allows the spring assembly to move and twist without clunks or binding like lower-priced camber plate kits.
Select your spring size and shock type from the menus above. The correct bearings, spacers, and hardware will be built into the camber plate for you. Ground Control applications cover all common spring sizes and many popular stock and performance dampers.
Ground Control has been engineering suspension mounts for competition use since 1980. Their camber plates are based on this rich history of custom suspensions for all types of driving - street, track, and mixed use. Each camber plate is a ground-up design for its intended use, not a compromise. Ground Control-branded parts have a limited lifetime warranty (bearings excluded).
