Ground Control Street Camber/Caster Plates for your F22 2-series, F30 3-series, and F32 4-series are based on their race-proven designs but with special features to optimize them for street-use. This not a racing mount, loosely adapted for the street. Features and goals differ between Street and Race designs. Ground Control properly engineers each kit for its intended use - the Street design has a 2° adjustment so you can improve performance but also correct for lowered suspensions. A urethane bushing isolates the bearing to absorb noise, vibration, and harshness much better than a solid metal design. Both camber and caster can be adjusted independently to correct or dial in alignment settings. Ground Control parts are covered with a limited lifetime warranty.
A Ground Control exclusive is the use of two separate bearings to manage load instead of the more typical single spherical. The strut shaft is supported by a proprietary spherical bearing. This supports the strut during side loads and range of motion only. The weight of the car is supported by another, separate needle bearing made specifically for Ground Control with an incredibly high axial rating of 12,100lbs. The two bearing layout greatly reduces the load and strain that a single bearing must support, which means less wear, longer life, quieter operation, and better performance.
F3X Street Camber Plate features:
- No cutting or modification required for install or use
- CNC machined aluminum plates
- Anodized or plated components for corrosion resistance
- Aircraft-grade, sealed waterproof spherical and needle bearings
- Dual bearing layout has less load demands than a single bearing design
- Isolated urethane bushing to absorb NVH - no metal-on-metal contact
- Steel slider inserts
- 30mm of camber adjustment
- Fast adjustment of camber and caster
- Aerospace-grade materials
- Rebuildable if you need a bearing or hardware
- Upper spring perch included
- Strut-specific hardware included
Select your spring size and shock type from the menus above. The correct bearings, spacers, and hardware will be built into the camber plate for you. Ground Control applications cover all common spring sizes and many popular stock and performance dampers.Strut Tower Bolts:
BMW built the F22/F30/F32 with either 5 or 3 mounting bolts on the front strut towers. Select which mounting method you need.Spring Sizes:
60mm (2.3"), 2.5", or any spring that uses the stock upper spring plate including sport/lowering springs.Shock Type:
AST, Bilstein, H&R, KONI, KW, MCS, Moton, Ohlins, and Stock/OEM. If your damper is not in the list, please select "Other" and one of our reps will contact you.
Ground Control has been engineering suspension mounts for competition use since 1980. Their camber plates are based on this rich history of custom suspensions for all types of driving - street, track, and mixed use. Each camber plate is a ground-up design for its intended use, not a compromise. Ground Control-branded parts have a limited lifetime warranty (bearings excluded).
If you need assistance selecting the correct options, please reach out to us via chat, email, or phone. Our expertise in BMW suspensions is unparalleled and we're happy to get you the right parts. In rare cases we may need to contact you during the order process to verify specs or get additional information.
BMW Fitments: 2 Series
F22 / F23 (2014+) > 228i
F22 / F23 (2014+) > 230i
F22 / F23 (2014+) > M235i
F22 / F23 (2014+) > M240i3 Series
F30 / F31 / F34 (2012+) > 320i
F30 / F31 / F34 (2012+) > 328d
F30 / F31 / F34 (2012+) > 328i
F30 / F31 / F34 (2012+) > 330i
F30 / F31 / F34 (2012+) > 335i
F30 / F31 / F34 (2012+) > 340i
F30 / F31 / F34 (2012+) > Hybrid 34 Series
F32 / F33 / F36 (2014+) > 428i
F32 / F33 / F36 (2014+) > 430i
F32 / F33 / F36 (2014+) > 435i
F32 / F33 / F36 (2014+) > 440i