Ground Control Coilover Conversion Kit - G80 M3 & G82 M4

BMW G80 M3 & M4 (including Competition) Coil Over Conversion Kit. This kit is available for both the RWD models as well as xDrive AWD and is fully compatible with the M Adaptive electronic damping system. The end result is a true coil-over suspension, with all the adjustability and performance, while retaining the EDC system. This is a GREAT option if you want to retain the Chassis / damper adjustment, but control your ride height and handling characteristics.   

At checkout please note if your car has adaptive suspension, the last 7 of your VIN and the desired spring rates (if choosing your own). You may also note your intended vehicle use, and we'll help select the best starting point.  

Contact us for help choosing spring rates.

• Designed to work with Adaptive M Suspension.
• Expected ride height change is approximately 0 to -1.75".
• 47mm of Camber adjustment (32mm negative, 15mm positive)
• 10mm of Caster adjustment range

This Kit Includes:

• Adjustable front camber/caster plates (that work with EDC)
• Front adjustable ride height conversion kit for OE struts
• Sealed & Waterproof Steering Bearings
• Front Eibach race springs (custom spring rates available)
• Front sway bar brackets for OE strut (powder coated, with Acceleration Sensor brackets)
• Front adjustable sway bar end links
• Rear Eibach race springs (custom rates available)
• Rear ride height adjusters (Static Style)

Option Add-Ons:

• OPTIONAL - Upgrade to Rear Weight Jack Height Adjuster (+$110)
• OPTIONAL - Add Front Helper Springs (+$165)
• OPTIONAL - Premium Config, Adds Weight Jacks + Front Helpers (+$275)

This adjustable spring kit gives you the option to customize the ride height of your vehicle. After several years of use in racing applications, Ground Control spring kits have been adapted for street use. Most other spring kits offer only one set ride height when installed. The Ground Control system's unique design allows for easy adjustment. Simply lift the corner(s) of the vehicle that you wish to adjust and spin the adjustable spring seat up or down to raise or lower the vehicle*. Ground Control spring kits are also designed to be used with either stock or aftermarket shocks.

• Springs: Ride height adjustable kits now exclusively feature Eibach springs. All racing and street/show spring rates are available. All Eibach springs offer a lifetime warranty against spring rate change and sagging.
   
• Adjusters: All adjusters consist of a threaded sleeve and adjustable spring seat. And are made using high strength 6061-T6 aluminum; anodized for greater durability and appearance. The threads on the adjusters are square cut which locks the adjustable spring seat in place under load. For further precaution, a setscrew in the adjustable spring seat can be used to secure adjustment. Upper spring perches are used to insulate the spring.

Ground Control works very hard with Eibach USA to make these springs to the standards that you demand. Lifetime guarantee on everything, not just springs. No excuses about "racing" or "special". If anything fails, while being correctly installed, it will be taken care of, period. Ground Control can only have a guarantee like this because every single part of the Ground Control Street coil-over kit is made by Ground Control or someone they trust. None of these parts are made in Taiwan. Everything is made in the USA.   

Kit includes everything you need to convert all four corners using your existing dampers.