The ultimate E46 track/race front control arm
bushing!
Ground Control's E46/Z4 Delrin/Alloy Front Control Arm Bushing set is a race product that offers minimal deflection by compromising NVH
(Noise, Vibration, Harshness) considerably. With the added NVH, this bushing set
is not suggested for street use.
The Delrin/Alloy design incorporates an outer anodized red
alloy housing used as a friction element for the Delrin insert. The hex end of
the control arm is sheathed by a anodized black alloy inner ring for the
self-lubricating Delrin insert to ride against. This system creates a heavy duty
solution that works extremely well in track and race atmospheres.
Most E46 have a 66mm control arm bushing. Some early E46 produced before 2/2001 may have a smaller 60mm bushing. However, BMW offered to upgrade the early cars with new 66mm bushings and a beefier control arm. If you have a 1999-2001 car you should check your bushing housing size. This product listing is for 60mm bushings only. However, we strongly recommend upgrading to our 66mm bushings and getting new housings.
Priced per set
BMW Fitments: 3 SeriesE46 (99-05) > 320i
E46 (99-05) > 323Ci
E46 (99-05) > 323i
E46 (99-05) > 328Ci
E46 (99-05) > 328i