Wishbone Hardware Kit, OEM - E82, E9X, E84, E89 (RWD)

This kit includes the hardware needed to replace one front wishbone on E82 1-series, E9X 3-series, E84 X1, and E89 Z4 models. Factory BMW hardware may be un-usable if the factory torque procedures are followed. This requires tightening the bolt, then tightening more to stretch it so it's less likely to come loose. Stretching the bolt makes it un-usable once removed.

This kit includes:
1 x 31106763928, M12x115mm inner bolt for inner bushing
1 x 33326760668, M12 collar nut for inner bushing
1 x 33306787062, M14 combination nut for outer ball joint

This is enough hardware for one wishbone. Order two (2) if replacing both front wishbones.

This is an OEM wishbone hardware kit manufactured by Lemforder or Sachs - original suppliers to BMW for this part, as well as many other control arms and bushings. As the OEM it meets all of BMW's original design, fitment, and performance requirements and is TUV approved. OEM parts are the best alternative to more expensive Original BMW parts because they are virtually identical without the inflated price tag. This part has a two year warranty.

For full BMW fitment information or for assistance from one of our BMW experts, we recommend calling us at 877-639-9648.