Rear Wishbone Hardware Kit, BMW - F10, F06, F13, F02

This is a kit of nuts and bolts that BMW says are required when changing a rear upper wishbone on F10 5-series, F06/F13 6-series, and F02 7-series. This applies to BMW wishbone part numbers 33326782135 and 33326782136.

It's rare for suspension hardware to require replacement. BMW usually does not call for all new hardware but they did on these part numbers. The only downside is a higher DIY cost.

Included in this kit:
1 x M14x1.5-10 hex nut with collar, 31106890194 (31106768886)
1 x M14x105mm 10.9 Eccentric bolt, 33326779785
1 x M14x120mm 10.9 hex collar screw, 33326783031
1 x Eccentric flat washer, 33306786187
1 x M14x1.5-10 combination nut, 33306787062

All parts are Genuine BMW items for the highest quality and fitment and include any changes or updates BMW engineers made to the original design.

BMW Fitments:

5 Series
F10 (11-16) > 528i
F10 (11-16) > 528i xDrive
F10 (11-16) > 535d
F10 (11-16) > 535d xDrive
F10 (11-16) > 535i
F10 (11-16) > 535i xDrive
F10 (11-16) > 550i
F10 (11-16) > 550i xDrive
F10 (11-16) > Hybrid 5
6 Series
F06 / F12 / F13 (12-18) > 640i
F06 / F12 / F13 (12-18) > 640i xDrive
F06 / F12 / F13 (12-18) > 650i
F06 / F12 / F13 (12-18) > 650i xDrive
7 Series
F01 / F02 (2009-2015) > 740i
F01 / F02 (2009-2015) > 740i xDrive
F01 / F02 (2009-2015) > 750i
F01 / F02 (2009-2015) > 750i xDrive
F01 / F02 (2009-2015) > 760Li
F01 / F02 (2009-2015) > 760Li xDrive