Newly-manufactured E70 X5 and E71 X6 steering rack is a direct replacement and no core charge.
Replaces BMW part numbers 32106771418, 32316773741.
+ Inspected and hydraulically tested
+ OE-grade, high-temperature seals and o-rings
+ New inner tie rods, boots, and OEM clamps included (outer tie rods sold separately, see below)
Fluid note: racks are designed with seals compatible with Pentosin CHF11S or EHF. ATF or similar "Power Steering Fluid" should not be used. Mixing CHF and ATF is not recommended and may lead to premature failure of the seals, pump, or rack and void the warranty. A complete flush of the entire steering system is recommended. We strongly urge you to add the CHF label to the cap on your reservoir (BMW part #71212122171).
As a new manufactured part, not rebuilt, no additional core charge applies!
This part is manufactured by an aftermarket supplier of European auto parts, including many steering components. While not carrying OEM status, this part follows the design of the original very closely and uses similar materials. The brand may even be OEM to another manufacturer besides BMW. This aftermarket brand has a two year warranty - the same as Genuine BMW and OEM brands.
BMW Fitments:
X5 Series
E70 X5 (07-13) > X5 3.0si (07-10)
E70 X5 (07-13) > X5 4.8i (07-10)
E70 X5 (07-13) > X5 xDrive35d (09-13)
E70 X5 (07-13) > X5 xDrive35i N55 (11-13)
E70 X5 (07-13) > X5 xDrive50i (11-13)
X6 Series
E71 X6 (2008-2014) > X6 xDrive35i N54 (08-09)
E71 X6 (2008-2014) > X6 xDrive35i N55 (10-13)
E71 X6 (2008-2014) > X6 xDrive50i (08-14)