Steering Rack - AAE (New, Not Rebuilt) - E46 323i 325i 328i 330i M3

BimmerWorld View... We've been using these AAE brand steering racks on a fair number of E46 builds (both M and non-M). Fitment and pricing are very good. Lock-to-lock turns are around 2.8 to 2.85. Of course, that's only a piece of the equation, and the ratio is the next bit that is important. There is approximately 144mm of travel in the tie rods from lock to lock. This means the rack rate is a little over 50mm per turn, which is very similar to the E46 ZCP rack. For comparison, an E46 M3 rack travels about 47mm per turn. In terms of quality, we have been very impressed. CRP is the parent company of AAE, so we feel that this is a trustworthy product.

Brand-new E46 steering rack. Specific fitment notes:
323i sedan: from 4/1999 production date
323ci coupe/convertible: from 4/1999 production date
328i sedan: from 4/1999 production date
328ci coupe: from 4/1999 production date
325i sedan: up to 9/2001 production date without M Sport package (S338)
325ci coupe/convertible: up to 9/2001 production date without M Sport package (S338)
330i sedan: up to 9/2001 production date without M Sport package (S338)
330ci coupe/convertible: up to 9/2001 production date without M Sport package (S338)
M3: 2001-2006 without Competition Package

Replaces BMW part numbers: 32136753438, 32136753807, 32136750200, 32136753853, 32132229397.

+ Inspected and hydraulically tested
+ Upgraded bar is heat-treated
+ New inner tie rods, boots, and OEM clamps included (outer tie rods sold separately, see below)
+ No core charge

Fluid note: new racks are designed with seals compatible with Pentosin CHF11S or EHF. ATF or similar "Power Steering Fluid" should not be used. Mixing CHF and ATF is not recommended and may lead to premature failure of the seals, pump, or rack and void the warranty. A complete flush of the entire steering system is recommended. We strongly urge you to add the CHF label to the cap on your reservoir (BMW part #71212122171).

This is a new, not rebuilt, steering rack so no core charge applies.

AAE is a US-based steering specialist with manufacturing in the US and China. Their new manufacturing goal is to meet the demand for steering components that are hard-to-find, no longer available from the OEM, or the core supply is below standard. AAE began as a Jaguar steering specialist, offering new and rebuilt steering components. They have grown into one of the leading suppliers of rebuilt steering systems in North America. As a veteran remanufacturer their expertise in designing new steering components is unparalleled. AAE improves on every component to ensure the finished product exceeds OEM standards. AAE parts have a two year warranty.