Powerflex Front Sway Bar Bushings, 26.5mm - E60 M5

These Powerflex Front Sway Bar Bushings were designed specifically for the 26.5mm sway bar found on E60 M5 models. The stiffer and more durable design of these sway bar bushings will increase the performance of your sway bars, as well as being a lifetime part you'll never need to purchase again.

Powerflex has extensive experience in automotive suspension and chassis systems and has combined these skills with advanced polyurethane manufacturing techniques. Durometer is standardized per fitment and location, so you can rest assured knowing the design engineers have selected the optimal urethane hardness for this specific part.

Street Performance for slightly more sport and precision in daily driving environments. Urethane material for less deflection, more precise handling, and better response but while retaining comfort for street use. These give your BMW the performance it should have had instead of a compromise.

Street/Track is a firmer urethane material that will further reduce deflection and provide a more rigid mount. These are typically on the edge of street-ability; firmer bushings will have more noise and vibration than a rubber or the Purple urethane but still acceptable for most for normal street use. For true racing or track use you would look for a Delrin or aluminum mount.

Note: Powerflex copper-based grease is supplied with every bushing set, and they will rarely need re-lubing due to the unique design features built into the material to hold the lubricant.

Lifetime warranty.

These bushings are designed to fit the model(s) listed below. However, we strongly advise you to measure the diameter (thickness) of your existing sway bar(s) to confirm sizes. Sway bar sizes vary by manufacturer/brand.

BMW Fitments:

5 Series
E60 (06-10) > M5