- Aluminum front control arms with Meyle HD ball joints
- Track-spec Delrin control arm bushings
- OEM Lemforder tie rods
- BimmerWorld adjustable sway bar links
For your track or race E46, stock front control arms and bushings just won't cut it. Rubber bushings don't belong on a serious track car. This kit includes our preferred front control arms with stronger ball joints (Meyle HD, similar to factory ZHP), BimmerWorld TrackCAB Delrin bushings with near-zero deflection, OEM tie rods, and BimmerWorld adjustable front sway bar links with Heim joints. These would be our preferred setup for building a track-focused E46 323i, 325i, 328i, or 330i.
With upgraded mounts the goal is to reduce alignment changes during cornering and braking. Rubber bushings are too soft and allow the suspension settings to drastically change. Solid Delrin bushings have almost zero deflection which makes the handling and steering more consistent, reliable, and direct feeling. Our Delrin bushings are low profile for minimum weight and better clearance for exhaust, undertrays, and tires. Also included are adjustable endlinks that make it easy to remove pre-load and set optimum sway bar position.
Because of the solid nature of Delrin, this kit is recommended for track day and full race cars only.
E46 (99-05) > 320i
E46 (99-05) > 323Ci
E46 (99-05) > 323i
E46 (99-05) > 325Ci
E46 (99-05) > 325i
E46 (99-05) > 328Ci
E46 (99-05) > 328i
E46 (99-05) > 330Ci
E46 (99-05) > 330iZ Series
E85 / E86 Z4 (03-08) > Z4 2.5i M54
E85 / E86 Z4 (03-08) > Z4 3.0i M54
E85 / E86 Z4 (03-08) > Z4 3.0i N52