This part is listed by BMW as BMW part number 31352405884 (31 35 2 405 884) and is described as a hardware and mount kit for a front strut replacement on E82 128i/135i and E9X 325i/328i/330i/335d/335i RWD models.
This kit is intended for M Sport suspension but also works great for Sport and base model suspensions, especially with lowering springs or coil overs. This is the perfect complement to any new front strut replacement as it includes nearly all of the hardware that can be replaced* along with a new Genuine BMW strut mount.
The official strut removal method from BMW is to remove the brakes from the hub carrier, disconnect the control arms at the outside mounts, and then drop the strut + carrier from the car. And then replace the strut, spring, and/or strut mount.
Do I need new hardware? Yes… The factory BMW torque spec for these bolts is to tighten to a specific torque value and then tighten an additional specific amount. The additional tightening will stretch the bolt and help ensure it does not become loose. Unfortunately, the stretch means the bolt is 1-time use and it will not take another tightening without compromising its strength. These bolts will likely fail if re-used!
This kit has enough pieces for ONE side - order TWO if you're replacing both front struts.
Fits RWD models only - not for xi or xDrive cars.
E82/E9X Front Strut Mount Kit contents -
1 x 07129905817, Xenon headlight leveling sensor M6 hex nut
1 x 31306772226, strut mount gasket
3 x 31316769731, strut mount M8 collar nut
1 x 31331110196, strut mount washer (dust protection collar)
1 x 31306763966, strut mount 55mm washer
1 x 31306775098, front strut mount (guide support)
3 x 33306787062, control arm & tie rod end M14 combination nut
2 x 33326760668, strut pinch M12 collar nut
1 x 33326768884, sway bar link M10 collar nut
2 x 34106864424, brake caliper M12 torx screw
1 x 34211161806, rotor retaining screw
Not included are the spring pads, plate, bump stop, and dust boot. See Related Items below.
This is a Genuine BMW E9X M Sport strut replacement kit with a two year warranty. Buying a Genuine part will usually be more expensive than an OEM or aftermarket brand but you are assured that it meets BMW's designs for fitment, performance, and longevity. It will also be the very latest design, incorporating any updates or revisions that an aftermarket brand typically will ignore.
For full BMW fitment information or for assistance from one of our BMW experts, we recommend calling us at 877-639-9648.
BMW Fitments:
1 Series
E82 / E88 (08-13) > 128i
E82 / E88 (08-13) > 135i N54 (08-10)
3 Series
E90 / E91 / E92 / E93 (06-13) > 325i
E90 / E91 / E92 / E93 (06-13) > 328i
E90 / E91 / E92 / E93 (06-13) > 330i
E90 / E91 / E92 / E93 (06-13) > 335d
E90 / E91 / E92 / E93 (06-13) > 335i N54 (07-10)
E90 / E91 / E92 / E93 (06-13) > 335i N55 (11-13)
E90 / E91 / E92 / E93 (06-13) > 335is N54
X1 Series
E84 X1 (2013-2015) > X1 28i