Easily adjust camber trackside with Vorshlag camber/caster plates. Oversized spherical bearings are designed to withstand the rigors of street and track abuse. All components are plated for maximum corrosion resistance and long life. Featuring CNC construction for the bearing holder and main plate, including engraved markings for vehicle orientation and hash marks for adjustment.
- Camber is easily adjustable at the track from the engine compartment with simple (metric) hand tools. No need to reach inside the wheel well with a wrench!
- Spherical bearing is among the largest for any BMW camber plate for better durability and wear
- Designed for maximum suspension bump travel / minimum stack-up height
- All components plated or anodized for maximum corrosion resistance and long life
- All necessary hardware and adapters included - these are ready to install right out of the box!
Select the spring size and strut brand from the menus above. Contact us if you don't see your combination listed.
Spring Notes: if your existing shocks/springs came with their own top mount you likely have a 60mm, 2.25", or 2.5" spring. If they are compatible with the stock front strut mount you likely need the “Stock/Sport Spring” option above. This is not always the case but is typical.
Shock Notes: the nut we include must match the strut pin on your car. But some strut manufacturers change the thread size. Select the correct shock type from the options above. In some cases a standard hex nut is not compatible with camber plates and a special extended deep nut is needed. We provide the correct nuts based on your selection. Contact us if you're not sure and we can send multiple top nut options.
Bilstein Shock Notes: the Bilstein strut can be either M12 or M14 sized. Almost all PSS and Clubsport coilovers should be M14 (select the B16/PSS option above). B6 and B8 should be M14 but we recommend confirming, The B4 can be either so you will need to confirm. If you're not sure after checking, we can send you both types for an additional charge.
Made in the USA
BMW Fitments:1 SeriesE82 / E88 (08-13) > 128i
E82 / E88 (08-13) > 135i
E82 / E88 (08-13) > 135is
3 SeriesE90 / E91 / E92 / E93 (06-13) > 325i
E90 / E91 / E92 / E93 (06-13) > 328i
E90 / E91 / E92 / E93 (06-13) > 330i
E90 / E91 / E92 / E93 (06-13) > 335i
E90 / E91 / E92 / E93 (06-13) > 335is
